Navy Luger Board.

lugerholsterrepair · 07-28-2011, 12:21 PM

Alf, I would need to see the number in the wood..I never like anything stamped in the wood except Anchor M or other type Navy indicators. Serial numbers or dates etc are usually a bad sign.
Yes, There should be a serial number stamped in the stock iron..just like an Artillery stock. Will likely have no suffix or an A suffix.
The stock iron or the steel disc is where you see most of the stampings although there are others ...
The type of wood/grain is a strong factor.

07-28-2011, 12:21 PM	#6
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,775 Thanks: 4,995 Thanked 3,134 Times in 1,439 Posts	Alf, I would need to see the number in the wood..I never like anything stamped in the wood except Anchor M or other type Navy indicators. Serial numbers or dates etc are usually a bad sign. Yes, There should be a serial number stamped in the stock iron..just like an Artillery stock. Will likely have no suffix or an A suffix. The stock iron or the steel disc is where you see most of the stampings although there are others ... The type of wood/grain is a strong factor. __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."