OK you got me

pipeman45 · 11-23-2004, 01:41 AM

After playing with my first Luger,an un-messed with Russian capture.Now I'm thinking about how to sneek another one in the house. These things are worse than drugs! I'm thinking about another nice shooter grade 9mm,but this time with a 6" barrel. Any thought on what to look for.

Ron Smith · 11-23-2004, 08:34 AM

Hi Dave,

You might start looking for a 70's production Mauser. The prices seem to be sensible, at least for now. In the $800 range. Check Guns America, there are usually a few posted.
That's about the only option for a 6"
shooter, unless you can find one that is re-barreled or rebuilt. BTW, the 6" are by far the most fun to shoot.
Ron

pipeman45 · 11-23-2004, 10:48 PM

Well it looks like I'm going back to the boards. Auction Arms is where I picked up the first one for under $350. I don't think my luck will hold for two guns. Are the 70's Mausers the only place to look for a longer barrel,at a poor mans price? I would like one with some history if I could find one.

Ron Smith · 11-23-2004, 11:18 PM

Might try this. It says it's a 6". Looks more like 8" to me. Does'nt look too bad if you can get it for the right price.

Ron

http://www.gunbroker.com/auction/Vie...?Item=25653220

DougT · 11-23-2004, 11:20 PM

You can buy 6" barrels from Nurmrich gun parts for a very reasonable price. Then have your RC re-barreled or buy another shooter and have it rebarreled. I think there are a few people on this forum who could do the work for you.
DougT

pipeman45 · 11-23-2004, 11:30 PM

Don't think I want to rebarrel my capture as its all matching. Except for the mag and grips. And the are an almost new FXO w/plactic base,the grips are very good condition Black Widow.

DougT · 11-23-2004, 11:33 PM

Correction: it's Numrich (not Nurmrich) and the website is www.gunpartscorp.com.
DougT

Steve Richards · 11-24-2004, 02:03 AM

Ones with 6" barrels can be hard to find.
A new stainless is $725.00 and a mint Interarms from the 70's will run a bit more.

Used could take a while to find.

Steve

pipeman45 · 11-24-2004, 02:11 AM

Oh well,the fun is in the hunt!

Karl · 11-24-2004, 01:46 PM

Pipeman,

Consider buying a shooter with a rough barrel and getting the barrel replaced with a 6". Hugh Clark on the forum rebarreled a Luger for me and as I recall, the cost was about $100. This is my favorite shooter. I'll post a picture if I have time. KFS

pipeman45 · 11-24-2004, 07:16 PM

Please, post the pic's. This would be a good way for me to go as I know I will shoot the heck out of it. Something you wouldn't want to do with a collector grade.

Pete Ebbink · 11-24-2004, 09:19 PM

Hi David,

Here is a 1920's Swiss commercial luger that I got from LugerDoc a couple of years ago. It is original finish but was rebarreled to 8" 9mm. Think I paid $ 825 or so...if I remember correctly.

Another LF member, Hugh Clark, re-worked the grips for me in the Swiss border-style...

This is the most fun-to-shoot luger in my shooter-collection...

Regards,

Pete... <img border="0" alt="[typing]" title="" src="graemlins/yltype.gif" />

Ron Smith · 11-24-2004, 10:34 PM

This is my favorite shooter. And possibly my favorite Luger. "It's fer usin', not jest lookin' at". A 1937 S/42 with a cutdown artillery barrel with the fine tune front sight sleeved on. And a Navy toggle installed.

pipeman45 · 11-25-2004, 01:45 AM

Nice guns there fellows. Nice to see that these old girls don't have to sit all the time but get taken to the dance.

Scott H. · 11-25-2004, 10:27 AM

Pete,

Very nice looking Swiss shooter Luger! From the picture it looks much too nice to be a shooter.

Regards, Scott

Karl · 11-28-2004, 10:50 AM

This is my favorite shooter: upper/lower mismatch (upper 1910 DWM, lower probably 1918 judging from the mill marks), 6" barrel added by Hugh, taller front sight from Brownells sight blank, Nils grips, MecGar mag with wooden plug added. Next I plan to re-straw the appropriate parts. Blueing is in pretty good shape. The basic gun was $500. but with modifications and postage I've probably got close to $800 in it.
KFS

11-23-2004, 01:41 AM	#1
pipeman45 User Join Date: May 2004 Location: Kentucky Posts: 539 Thanks: 0 Thanked 1 Time in 1 Post	OK you got me After playing with my first Luger,an un-messed with Russian capture.Now I'm thinking about how to sneek another one in the house. These things are worse than drugs! I'm thinking about another nice shooter grade 9mm,but this time with a 6" barrel. Any thought on what to look for. __________________ Dave

11-23-2004, 08:34 AM	#2
Ron Smith User Join Date: Feb 2004 Location: Orygun Posts: 4,243 Thanks: 118 Thanked 245 Times in 150 Posts	Hi Dave, You might start looking for a 70's production Mauser. The prices seem to be sensible, at least for now. In the $800 range. Check Guns America, there are usually a few posted. That's about the only option for a 6" shooter, unless you can find one that is re-barreled or rebuilt. BTW, the 6" are by far the most fun to shoot. Ron __________________ I Still Need DWM side plate #49... if anyone runs across a nice one. What ~Rudyard Kipling~ said...

11-23-2004, 10:48 PM	#3
pipeman45 User Join Date: May 2004 Location: Kentucky Posts: 539 Thanks: 0 Thanked 1 Time in 1 Post	Well it looks like I'm going back to the boards. Auction Arms is where I picked up the first one for under $350. I don't think my luck will hold for two guns. Are the 70's Mausers the only place to look for a longer barrel,at a poor mans price? I would like one with some history if I could find one. __________________ Dave

11-23-2004, 11:18 PM	#4
Ron Smith User Join Date: Feb 2004 Location: Orygun Posts: 4,243 Thanks: 118 Thanked 245 Times in 150 Posts	Might try this. It says it's a 6". Looks more like 8" to me. Does'nt look too bad if you can get it for the right price. Ron http://www.gunbroker.com/auction/Vie...?Item=25653220 __________________ I Still Need DWM side plate #49... if anyone runs across a nice one. What ~Rudyard Kipling~ said...

11-23-2004, 11:30 PM	#6
pipeman45 User Join Date: May 2004 Location: Kentucky Posts: 539 Thanks: 0 Thanked 1 Time in 1 Post	Don't think I want to rebarrel my capture as its all matching. Except for the mag and grips. And the are an almost new FXO w/plactic base,the grips are very good condition Black Widow. __________________ Dave

11-23-2004, 11:20 PM	#5
DougT User Join Date: Oct 2003 Location: So. Cal. Posts: 171 Thanks: 0 Thanked 0 Times in 0 Posts	You can buy 6" barrels from Nurmrich gun parts for a very reasonable price. Then have your RC re-barreled or buy another shooter and have it rebarreled. I think there are a few people on this forum who could do the work for you. DougT

11-23-2004, 11:33 PM	#7
DougT User Join Date: Oct 2003 Location: So. Cal. Posts: 171 Thanks: 0 Thanked 0 Times in 0 Posts	Correction: it's Numrich (not Nurmrich) and the website is www.gunpartscorp.com. DougT

11-24-2004, 02:03 AM	#8
Steve Richards User Join Date: Jun 2002 Location: Beaverton, Oregon Posts: 487 Thanks: 0 Thanked 1 Time in 1 Post	Ones with 6" barrels can be hard to find. A new stainless is $725.00 and a mint Interarms from the 70's will run a bit more. Used could take a while to find. Steve

11-24-2004, 02:11 AM	#9
pipeman45 User Join Date: May 2004 Location: Kentucky Posts: 539 Thanks: 0 Thanked 1 Time in 1 Post	Oh well,the fun is in the hunt! __________________ Dave

11-24-2004, 01:46 PM	#10
Karl Lifer - Twice Over Lifetime Forum Patron Join Date: Jun 2002 Location: Savannah Posts: 530 Thanks: 0 Thanked 280 Times in 123 Posts	Pipeman, Consider buying a shooter with a rough barrel and getting the barrel replaced with a 6". Hugh Clark on the forum rebarreled a Luger for me and as I recall, the cost was about $100. This is my favorite shooter. I'll post a picture if I have time. KFS

11-24-2004, 07:16 PM	#11
pipeman45 User Join Date: May 2004 Location: Kentucky Posts: 539 Thanks: 0 Thanked 1 Time in 1 Post	Please, post the pic's. This would be a good way for me to go as I know I will shoot the heck out of it. Something you wouldn't want to do with a collector grade. __________________ Dave

11-24-2004, 09:19 PM	#12
Pete Ebbink User Join Date: Jun 2002 Location: The USA Posts: 5,919 Thanks: 0 Thanked 6 Times in 4 Posts	Hi David, Here is a 1920's Swiss commercial luger that I got from LugerDoc a couple of years ago. It is original finish but was rebarreled to 8" 9mm. Think I paid $ 825 or so...if I remember correctly. Another LF member, Hugh Clark, re-worked the grips for me in the Swiss border-style... This is the most fun-to-shoot luger in my shooter-collection... Regards, Pete... <img border="0" alt="[typing]" title="" src="graemlins/yltype.gif" />

11-24-2004, 10:34 PM	#13
Ron Smith User Join Date: Feb 2004 Location: Orygun Posts: 4,243 Thanks: 118 Thanked 245 Times in 150 Posts	This is my favorite shooter. And possibly my favorite Luger. "It's fer usin', not jest lookin' at". A 1937 S/42 with a cutdown artillery barrel with the fine tune front sight sleeved on. And a Navy toggle installed. __________________ I Still Need DWM side plate #49... if anyone runs across a nice one. What ~Rudyard Kipling~ said...

11-25-2004, 01:45 AM	#14
pipeman45 User Join Date: May 2004 Location: Kentucky Posts: 539 Thanks: 0 Thanked 1 Time in 1 Post	Nice guns there fellows. Nice to see that these old girls don't have to sit all the time but get taken to the dance. __________________ Dave

11-25-2004, 10:27 AM	#15
Scott H. User Join Date: Oct 2003 Location: The Great Northwest Posts: 66 Thanks: 10 Thanked 1 Time in 1 Post	Pete, Very nice looking Swiss shooter Luger! From the picture it looks much too nice to be a shooter. Regards, Scott

11-28-2004, 10:50 AM	#16
Karl Lifer - Twice Over Lifetime Forum Patron Join Date: Jun 2002 Location: Savannah Posts: 530 Thanks: 0 Thanked 280 Times in 123 Posts	This is my favorite shooter: upper/lower mismatch (upper 1910 DWM, lower probably 1918 judging from the mill marks), 6" barrel added by Hugh, taller front sight from Brownells sight blank, Nils grips, MecGar mag with wooden plug added. Next I plan to re-straw the appropriate parts. Blueing is in pretty good shape. The basic gun was $500. but with modifications and postage I've probably got close to $800 in it. KFS