how to tighten up loose grip panels

John Sabato · 12-16-2004, 10:50 AM

Another method that has seen some success on grips that are not very loose is to use neoprene O-rings that are exactly the same size, or slightly smaller than the diameter of the grip screw. The neoprene crushes softly and takes up the space between the screw and the grip without any kind of permanent modification to either...

You can find them in most large home stores like Home Depot or Lowes, and probably other large hardware stores... just take a grip screw with you to make sure you get the right size.

12-16-2004, 10:50 AM	#5
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,156 Thanks: 3,003 Thanked 2,309 Times in 1,098 Posts	Another method that has seen some success on grips that are not very loose is to use neoprene O-rings that are exactly the same size, or slightly smaller than the diameter of the grip screw. The neoprene crushes softly and takes up the space between the screw and the grip without any kind of permanent modification to either... You can find them in most large home stores like Home Depot or Lowes, and probably other large hardware stores... just take a grip screw with you to make sure you get the right size. __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*