Recoil Spring Replacement

Thor · 02-27-2004, 11:24 PM

Yes, sometimes AFTER you compress the spring, you might have to push left or right with a screw driver on the end of the spring guide depending on whether you want in to engage or disengage the arm that connects to the coupling link when you release the compressive force on the guide. ALSO, there was one error in the picture that occurs between step six and seven, the hook on the end of the spring guide is shown backwards or pointed in the wrong direction, the entire assembly should be rotated 180 degrees so the hook now faces the trigger guard instead of the rear grip strap.

02-27-2004, 11:24 PM	#5
Thor User Join Date: Jun 2002 Location: Rio Rancho, New Mexico Posts: 4,583 Thanks: 958 Thanked 970 Times in 276 Posts	Yes, sometimes AFTER you compress the spring, you might have to push left or right with a screw driver on the end of the spring guide depending on whether you want in to engage or disengage the arm that connects to the coupling link when you release the compressive force on the guide. ALSO, there was one error in the picture that occurs between step six and seven, the hook on the end of the spring guide is shown backwards or pointed in the wrong direction, the entire assembly should be rotated 180 degrees so the hook now faces the trigger guard instead of the rear grip strap. __________________ Thor's Luger Clinic http://members.rennlist.com/lugerman/ Ted Green (Thor Yaller Boots) 725 Western Hills Dr SE, Rio Rancho, NM 87124 915-526-8925 Email thor340@aol.com ----------------------------------- John3:3 Jesus answered and said to him, "Most assuredly, I say to you, unless one is born again, he cannot see the kingdom of God."