upload photo | donate | calendar
|
my profile |
register |
faq |
search upload photo | donate | calendar |
|
|
02-16-2018, 11:51 AM
|
#1 |
|
Patron
LugerForum Patron Join Date: Nov 2008
Posts: 4,047
Thanks: 578
Thanked 1,414 Times in 887 Posts
|
G. T.
You are exactly correct on the fixes. I lightly filed away any burrs on the mag AND on the magazine catch button on the loader, then I bent to lips of the loader up just a bit, now it fits correctly. dju |
|
|
|
02-16-2018, 01:01 PM
|
#2 |
|
Lifer
Lifetime Forum Patron Join Date: Jun 2002
Location: Chandler Arizona
Posts: 3,528
Thanks: 1,334
Thanked 3,711 Times in 1,014 Posts
|
More drum stuff!
Another point in which Don is right on, is in taking the drum apart!!!! Better get used to it and while you're staring at it...
 ... get out some 400 W/D and 3M blending pads, and POLISH the "S*#&" out of every spot of interior blue you can find!!!!!! Especially the transition from drum to vertical and the inside walls... When it's right, and fully loaded, you can "settle" the column just by squeezing the lever a bit more...  ... Remember, the first 17 rounds are on the mainspring, the next 15 are on the coil spring... if you have a problem, track where in the string it happens... I know for a fact you'll know a lot more about drums when you're through with this project!!!  ... best to all, til...lat'r....GT.....
|
|
|
|
 |
|
|
Hybrid Mode
