Obscenely heavy trigger on 1912 P08, "two fingers" heavy

[JiveTurkey]

Originally Posted by Olle

You need to use a penetrating oil (like Kroil or WD-40). Just soak it good, tap it against the workbench and it should hopefully pop right out. Once it's loose you may want to disassemble it for a clean/lube job, and you do that by pushing out that little pin. Most punch sets won't have a punch small enough, but it can usually be pushed out with just a piece of wire.

I'm planning some solvent soak first to dissolve the crud, and then an oil soak to hopefully free it up.