Obscenely heavy trigger on 1912 P08, "two fingers" heavy

[Olle]

Originally Posted by JiveTurkey

Hoppes 9 won't hurt the finish right? It's what I plan to use as long as you guys give me the green light.

You need to use a penetrating oil (like Kroil or WD-40). Just soak it good, tap it against the workbench and it should hopefully pop right out. Once it's loose you may want to disassemble it for a clean/lube job, and you do that by pushing out that little pin. Most punch sets won't have a punch small enough, but it can usually be pushed out with just a piece of wire.