M1911 Barrel Bushing Q - Page 2

sheepherder · 05-07-2016, 06:36 PM

Hey! I found my .45 barrel bushing reamer!

It got misplaced into, of all places, my drill and ...reamer...drawer...

Kinda grubby looking...Like it got put away without being cleaned...

It's obvious why I couldn't find it...It looks like any other drill tube...

alanint · 05-08-2016, 01:32 PM

I find that a stainless bushing on an all-blued pistol is quite attractive.

sheepherder · 05-08-2016, 05:46 PM

Quote:

Originally Posted by alanint

I find that a stainless bushing on an all-blued pistol is quite attractive.

I'm sure another member here can put Marc's bushing to good use. Maybe even as you suggest.

For those not familiar with the collet bushing, here is one with its 38 Super barrel.

Edit: The bushing has four slots. The 'groove' you see is an internal ridge that physically touches the barrel. A 'normal' Colt bushing is a thousandth or so over the barrel dia, and theoretically rides on a film of oil, similar to an automotive crankshaft bearing. I don't shoot my Colts enough to notice any appreciable wear, and the collet flange ID is within a thousandth or so of the barrel dia, so I suppose that acts as a kind of 'fallback' if the fingers should wear enough to no longer center the barrel in the bushing. Just conjecture on my part.

John Sabato · 05-09-2016, 10:13 AM

I own a Series 70 full size commercial Colt with the collet bushing that I bought new about 1971 and have never had a problem with it.

Sergio Natali · 05-09-2016, 12:19 PM

Quote:

Originally Posted by John Sabato

I own a Series 70 full size commercial Colt with the collet bushing that I bought new about 1971 and have never had a problem with it.

John

I've always had a weak spot for USGI 1911, but shhhh! don't tell anybody at the Luger forum though!

kurusu · 05-09-2016, 01:45 PM

That 1911A1 of yours looks great. Congratulations Sergio.

PS. More than great it looks brand new. Amazing for a 1943 pistol.

My 1911A1. Mostly Ithaca but with a Remington frame, was rebuilt in Augusta Arsenal in the 50s and looks like it went through WWII, Korea and Vietnam before it found it's way into my hands.

Sergio Natali · 05-10-2016, 02:20 AM

Quote:

Originally Posted by kurusu

That 1911A1 of yours looks great. Congratulations Sergio.

PS. More than great it looks brand new. Amazing for a 1943 pistol.

My 1911A1. Mostly Ithaca but with a Remington frame, was rebuilt in Augusta Arsenal in the 50s and looks like it went through WWII, Korea and Vietnam before it found it's way into my hands.

In fact I'm almost sure it's unissued.

Arsenal rebuilds are sought after by many collectors now, they represent a page of the US history.

kurusu · 05-10-2016, 03:16 AM

Most collectors would frown at its battered look.

Click image for larger version

Name: 1911A1 Ithaca.jpg
Views: 121
Size: 38.9 KB
ID: 58839

sheepherder · 05-10-2016, 09:26 AM

I was shocked to find, while measuring barrel/muzzle diameters last night, that I have seven 1911-style handguns!

Three Colt-Hartford, two 38 Super, one each Argentine and Brazilian army, one with rib, three with collet bushings, one Gold Cup, two Series 70, one Commander, and an assortment of accessory caliber barrels, sometimes on, sometimes boxed.

There's only one I shoot with any regularity: the Gold Cup.

I gotta clean out my safe.

Vlim · 05-10-2016, 09:37 AM

I'm still waiting for someone to make a 1911 with a Mauser banner logo on it...

mrerick · 05-10-2016, 10:11 AM

The M1911M1:

rhuff · 05-10-2016, 06:59 PM

Quote:

Originally Posted by kurusu

Most collectors would frown at its battered look.

Attachment 58839

This old warrior just says to me, "I have been there and done that many times"......I accept that definition. Only time and action can produce that patina.

Olle · 05-10-2016, 09:28 PM

Quote:

Originally Posted by Vlim

I'm still waiting for someone to make a 1911 with a Mauser banner logo on it...

They're nice...

mrerick · 05-10-2016, 09:44 PM

I actually saw a Remington in my LGS today on consignment for $1800 in pristine condition. Probably one of the NRA refurb pistols available from the DCM...

Alas, not a Mauser.

Marc

DonVoigt · 05-10-2016, 11:11 PM

Quote:

Originally Posted by Olle

They're nice...

I thought they were marked on the TOP of the slide!

Sergio Natali · 05-11-2016, 03:45 AM

Quote:

Originally Posted by Olle

They're nice...

Sacrilege!!

Olle · 05-11-2016, 07:56 AM

Quote:

Originally Posted by DonVoigt

I thought they were marked on the TOP of the slide!

I don't know... For some reason, it's very difficult to find any info on this gun...

Seriously, I don't know if mrerick's picture also is a photoshop, but wasn't there a company that stamped slides with the Mauser banner and sold them as German made?

mrerick · 05-11-2016, 09:10 AM

GIMP (the open version of PhotoShop) is your friend and confound-er...

Gerben said he wanted one...

sheepherder · 05-11-2016, 10:05 AM

Quote:

Originally Posted by Vlim

I'm still waiting for someone to make a 1911 with a Mauser banner logo on it...

Quote:

Originally Posted by mrerick

Gerben said he wanted one...

...But none of you have shown the banner logo...

mrerick · 05-11-2016, 10:41 AM

Isn't that the Mauser banner just above the slide release lever in the M1911m1?

Marc

05-07-2016, 06:36 PM	#21
sheepherder Lifer Lifetime Forum Patron Join Date: Feb 2009 Location: ...on the 'ol Erie Canal... Posts: 8,197 Thanks: 1,416 Thanked 4,462 Times in 2,336 Posts	Hey! I found my .45 barrel bushing reamer! It got misplaced into, of all places, my drill and ...reamer...drawer... Kinda grubby looking...Like it got put away without being cleaned... It's obvious why I couldn't find it...It looks like any other drill tube... Attached Thumbnails __________________ I like my coffee the way I like my women... ...Cold and bitter...

05-09-2016, 10:13 AM	#24
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,156 Thanks: 3,003 Thanked 2,308 Times in 1,098 Posts	I own a Series 70 full size commercial Colt with the collet bushing that I bought new about 1971 and have never had a problem with it. __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

05-09-2016, 01:45 PM	#26
kurusu User Join Date: Sep 2007 Posts: 1,225 Thanks: 2,679 Thanked 930 Times in 509 Posts	That 1911A1 of yours looks great. Congratulations Sergio. PS. More than great it looks brand new. Amazing for a 1943 pistol. My 1911A1. Mostly Ithaca but with a Remington frame, was rebuilt in Augusta Arsenal in the 50s and looks like it went through WWII, Korea and Vietnam before it found it's way into my hands. Last edited by kurusu; 05-09-2016 at 05:25 PM.

05-10-2016, 03:16 AM	#28
kurusu User Join Date: Sep 2007 Posts: 1,225 Thanks: 2,679 Thanked 930 Times in 509 Posts	Most collectors would frown at its battered look. Last edited by kurusu; 05-10-2016 at 01:27 PM.

05-10-2016, 09:26 AM	#29
sheepherder Lifer Lifetime Forum Patron Join Date: Feb 2009 Location: ...on the 'ol Erie Canal... Posts: 8,197 Thanks: 1,416 Thanked 4,462 Times in 2,336 Posts	I was shocked to find, while measuring barrel/muzzle diameters last night, that I have seven 1911-style handguns! Three Colt-Hartford, two 38 Super, one each Argentine and Brazilian army, one with rib, three with collet bushings, one Gold Cup, two Series 70, one Commander, and an assortment of accessory caliber barrels, sometimes on, sometimes boxed. There's only one I shoot with any regularity: the Gold Cup. I gotta clean out my safe. Attached Thumbnails __________________ I like my coffee the way I like my women... ...Cold and bitter... Last edited by sheepherder; 05-11-2016 at 04:11 PM.

05-08-2016, 01:32 PM	#22
alanint User Join Date: Mar 2008 Location: Marco Island, Florida Posts: 4,867 Thanks: 1,685 Thanked 1,917 Times in 1,193 Posts	I find that a stainless bushing on an all-blued pistol is quite attractive.

05-10-2016, 09:37 AM	#30
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,053 Thanks: 1,036 Thanked 3,990 Times in 1,205 Posts	I'm still waiting for someone to make a 1911 with a Mauser banner logo on it...

05-10-2016, 10:11 AM	#31
mrerick Super Moderator - Patron LugerForum Life Patron Join Date: Dec 2009 Location: Eastern North Carolina, USA Posts: 3,920 Thanks: 1,377 Thanked 3,135 Times in 1,518 Posts	Here you go, Gerben... The M1911M1: Attached Thumbnails __________________ Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war.

05-10-2016, 09:44 PM	#34
mrerick Super Moderator - Patron LugerForum Life Patron Join Date: Dec 2009 Location: Eastern North Carolina, USA Posts: 3,920 Thanks: 1,377 Thanked 3,135 Times in 1,518 Posts	I actually saw a Remington in my LGS today on consignment for $1800 in pristine condition. Probably one of the NRA refurb pistols available from the DCM... Alas, not a Mauser. Marc __________________ Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war.

05-11-2016, 09:10 AM	#38
mrerick Super Moderator - Patron LugerForum Life Patron Join Date: Dec 2009 Location: Eastern North Carolina, USA Posts: 3,920 Thanks: 1,377 Thanked 3,135 Times in 1,518 Posts	GIMP (the open version of PhotoShop) is your friend and confound-er... Gerben said he wanted one... __________________ Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war.

05-11-2016, 10:41 AM	#40
mrerick Super Moderator - Patron LugerForum Life Patron Join Date: Dec 2009 Location: Eastern North Carolina, USA Posts: 3,920 Thanks: 1,377 Thanked 3,135 Times in 1,518 Posts	Isn't that the Mauser banner just above the slide release lever in the M1911m1? Marc __________________ Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war.