new MacGar magazine

rhuff · 01-05-2016, 04:44 PM

I have had a couple of mags over the years that did not want to lock into the mag well of my Interarms Parabellums or P08 Lugers.. On examining them closely, I found a burr or incomplete cut on the hole where the mag catch enters the mag. I couple of passes with a good needle file in the mag hole solved the problem.....piece of cake!! You might want to look at your mag and see if this could be the problem.

01-05-2016, 04:44 PM	#10
rhuff Patron LugerForum Patron Join Date: Mar 2011 Location: Az. Posts: 2,315 Thanks: 2,748 Thanked 998 Times in 733 Posts	I have had a couple of mags over the years that did not want to lock into the mag well of my Interarms Parabellums or P08 Lugers.. On examining them closely, I found a burr or incomplete cut on the hole where the mag catch enters the mag. I couple of passes with a good needle file in the mag hole solved the problem.....piece of cake!! You might want to look at your mag and see if this could be the problem.