Free up relic luger - Page 3

02tobbe · 06-02-2010, 09:51 AM

SUCCESS!

I have finally managed to get the gun apart!

It has been laying in diesel for 3 weeks and then I heated it and pounded the hell out of it. I will post pictures later, but it actually looks pretty good inside, not much rust at all.

Went Blakely · 06-06-2010, 07:32 AM

Eagerly awaiting pics my friend

Good work!

02tobbe · 06-07-2010, 04:42 PM

As promised some pictures of my now fully moving and working(well apart from the safety) P08. The last picture is the bullet that was highest up in the mag, not drilled thru...

I have ordered some new made grips and a used mag, still need some new springs, screws for the grip and a safety lever.

Went Blakely · 06-08-2010, 08:10 AM

And it even strips! Wow, free'd up pretty well actually, that'll look great hanging on the wall!

Lugerdoc · 06-08-2010, 09:04 AM

)2 2 B, I should have all of the parts you need and the pitted ones are cheap. TH

Olle · 06-08-2010, 09:16 AM

That's some really impressive work, it will make a great conversation piece once you get it fixed with new springs and a set of grips! I thought this project was crazy, but yours is definitely worse... http://skytteforum.com/default.aspx?g=posts&t=18027

Mauser720 · 06-08-2010, 09:18 AM

02tobbe -

Congratulations on doing such a nice job!

Regarding this statement: "The last picture is the bullet that was highest up in the mag, not drilled thru..."

As a suggestion, it would probably be a lot safer to use an inertial bullet puller to pull that bullet, rather than drilling a hole in the case when there is still powder in it. After all, that is still a live round. Just a thought. Okay? (Or maybe I just misunderstood what you were saying.)

Ron

mrerick · 06-08-2010, 09:23 AM

Is that a Mauser hump that I see before me?

Congratulations!!!!

Marc

newluger · 06-08-2010, 03:46 PM

Good Job!! You had a real task before you, and it looks like you won. BTW, it does look like a Mauser hump.

Newluger

06-06-2010, 07:32 AM	#42
Went Blakely User Join Date: Feb 2008 Location: Australia Posts: 231 Thanks: 4 Thanked 8 Times in 6 Posts	Eagerly awaiting pics my friend Good work! __________________ Went Blakely

06-08-2010, 08:10 AM	#44
Went Blakely User Join Date: Feb 2008 Location: Australia Posts: 231 Thanks: 4 Thanked 8 Times in 6 Posts	And it even strips! Wow, free'd up pretty well actually, that'll look great hanging on the wall! __________________ Went Blakely

06-08-2010, 09:04 AM	#45
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	)2 2 B, I should have all of the parts you need and the pitted ones are cheap. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

06-08-2010, 09:18 AM	#47
Mauser720 User Join Date: Aug 2007 Location: Kansas Posts: 535 Thanks: 18 Thanked 49 Times in 33 Posts	02tobbe - Congratulations on doing such a nice job! Regarding this statement: "The last picture is the bullet that was highest up in the mag, not drilled thru..." As a suggestion, it would probably be a lot safer to use an inertial bullet puller to pull that bullet, rather than drilling a hole in the case when there is still powder in it. After all, that is still a live round. Just a thought. Okay? (Or maybe I just misunderstood what you were saying.) Ron __________________ Mauser720 - Ron "Those who do not know history are doomed to repeat it."

06-02-2010, 09:51 AM	#41
02tobbe User Join Date: Mar 2010 Posts: 19 Thanks: 0 Thanked 0 Times in 0 Posts	SUCCESS! I have finally managed to get the gun apart! It has been laying in diesel for 3 weeks and then I heated it and pounded the hell out of it. I will post pictures later, but it actually looks pretty good inside, not much rust at all.

06-07-2010, 04:42 PM	#43
02tobbe User Join Date: Mar 2010 Posts: 19 Thanks: 0 Thanked 0 Times in 0 Posts	As promised some pictures of my now fully moving and working(well apart from the safety) P08. The last picture is the bullet that was highest up in the mag, not drilled thru... I have ordered some new made grips and a used mag, still need some new springs, screws for the grip and a safety lever.

06-08-2010, 09:16 AM	#46
Olle User Join Date: Feb 2010 Location: Tennessee Posts: 1,149 Thanks: 159 Thanked 664 Times in 318 Posts	That's some really impressive work, it will make a great conversation piece once you get it fixed with new springs and a set of grips! I thought this project was crazy, but yours is definitely worse... http://skytteforum.com/default.aspx?g=posts&t=18027

06-08-2010, 09:23 AM	#48
mrerick Super Moderator - Patron LugerForum Life Patron Join Date: Dec 2009 Location: Eastern North Carolina, USA Posts: 3,920 Thanks: 1,377 Thanked 3,135 Times in 1,518 Posts	Is that a Mauser hump that I see before me? Congratulations!!!! Marc

06-08-2010, 03:46 PM	#49
newluger User Join Date: Aug 2009 Location: Franklin Tennessee Posts: 119 Thanks: 22 Thanked 10 Times in 7 Posts	Good Job!! You had a real task before you, and it looks like you won. BTW, it does look like a Mauser hump. Newluger