my profile |
register |
faq |
search upload photo | donate | calendar |
01-06-2008, 10:52 PM | #1 |
Patron
LugerForum Patron Join Date: May 2005
Location: Perth, West Oz
Posts: 93
Thanks: 0
Thanked 6 Times in 4 Posts
|
1916 Holster
I have a 1916 dated P-08 holster that someone has cut a couple of slots into between the belt loops. The slots are about as wide as the belt loop and the about the same spacing. The rear loop seems to be a replacement. Any idea what the slots were for. All I can think is maybe the original loop broke and a makeshift loop was tied through till the new one could be sewn on. Thanks...Chip
|
01-07-2008, 07:22 AM | #2 |
Moderator
Lifetime LugerForum Patron Join Date: Oct 2002
Location: Europe
Posts: 5,053
Thanks: 1,036
Thanked 3,988 Times in 1,205 Posts
|
Hi Fazer,
Looks like you've got a holster that was modified for the Norwegian web belt hanger after WW2. The loops were cut off and a leather strap that held the metal web belt hanger was riveted in place with 4 rivets. Many of those holsters were restored when they came on the market in the late 1980s and early 1990s. The hanger was removed, the holes left or just plugged and new loops were sewn on. |
01-08-2008, 09:08 AM | #3 |
Patron
LugerForum Patron Join Date: May 2005
Location: Perth, West Oz
Posts: 93
Thanks: 0
Thanked 6 Times in 4 Posts
|
|
01-08-2008, 09:22 AM | #4 |
Moderator
Lifetime LugerForum Patron Join Date: Oct 2002
Location: Europe
Posts: 5,053
Thanks: 1,036
Thanked 3,988 Times in 1,205 Posts
|
Hi,
Well, the good news is: No Norwegian conversion. It indeed looks like a makeshift belt loop. |
01-08-2008, 10:02 AM | #5 |
Super Moderator
Eternal Lifer LugerForum Patron Join Date: Jun 2002
Location: North of Spokane, WA
Posts: 15,927
Thanks: 2,028
Thanked 4,525 Times in 2,090 Posts
|
If someone is going to carry the luger sideways? Isn't that odd placement of the cuts?
And thye look like original belt loops, so why would someone do this? ed
__________________
Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV |
01-08-2008, 10:54 AM | #6 |
Moderator
Lifetime Forum Patron Join Date: Jun 2002
Location: Arizona/Colorado
Posts: 7,771
Thanks: 4,922
Thanked 3,123 Times in 1,434 Posts
|
First time I have ever seen this type of cut on a holster. Can't explain it myself. Just some idiot with a stupid idea and a pocket knife! Usually I see virtical slits where the belt loops were and they thread a belt thru the slits.
Jerry Burney
__________________
Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know." |
01-08-2008, 11:25 AM | #7 |
Moderator
2010 LugerForum Patron Join Date: Jun 2002
Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso
Posts: 7,017
Thanks: 1,089
Thanked 5,164 Times in 1,700 Posts
|
Looking at the compression marks above the lower slot which might indicate upward pressure, i.e. what you might expect if the holster was suspended at that point, could they have been cut for a shoulder strap of some sort?
__________________
If it's made after 1918...it's a reproduction |
01-08-2008, 12:56 PM | #8 |
Moderator
Lifetime Forum Patron Join Date: Jun 2002
Location: Arizona/Colorado
Posts: 7,771
Thanks: 4,922
Thanked 3,123 Times in 1,434 Posts
|
Ron, Yes..I thought that too but not a very effecient way to do it, one hole above the other..more logical would be one on either side to accomodate a shoulder strap.
There can be no end of theories but the fact of the matter is... what used to be a good collectable holster has two holes in it! Jerry Burney
__________________
Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know." |
|
|