POLL - M1906 DWM-Swiss Cross/Sunburst Lugers

Pete Ebbink · 04-29-2007, 04:45 PM

Please join us in helping provide some info. about your M1906 DWM-Swiss Luger (Cross/Sunburst variety only).

I am helping Members Mike and Armin to establish if a variety in the numbering of the TD levers and the trigger side plate exist and came from the factory.

Most commercial contract Lugers will have the 2-digits of the TD lever and the trigger side plate placed on the bottom edge with the tops of these numbers pointing away from the side of the pistol (...I call this rightside-up).

Mike, Armin, and others theorize that some of these M1906 DWM-Swiss cross/sunburst lugers left the factory with un-numbered TD levers and the 2 digits on the trigger side plate upside-down...that is with the tops of their numbers pointing towards the side of the pistol.

If you own a M1906 DWM-Swiss cross/sunburst Luger, please take a moment and fill out the Poll.

Please remember to indicate if you think your Luger is in a factory-original condition or a Swiss Ordnance rework or other rework.

Thanks in advance for your help !!!

View Poll Results: M1906 Swiss Cross/Sunburst Numbering On Your TD Lever and your Trigger Side Plate
Serials 5001-5600 (made 1906) - Both TD lever & side plate have 2-digits, tops of numbers pointing away from Luger side.	2	16.67%
Serials 5001-5600 (made 1906) - No number on TD lever & side plate numbers are upside-down.	1	8.33%
Serials 5601-7100 (made 1907) - Both TD lever & side plate have 2-digits, tops of numbers pointing away from Luger side.	1	8.33%
Serials 5601-7100 (made 1907) - No number on TD lever & side plate numbers are upside-down.	1	8.33%
Serials 7101-9050 (made 1908) - Both TD lever & side plate have 2-digits, tops of numbers pointing away from Luger side.	2	16.67%
Serials 7101-9050 (made 1908) - No number on TD lever & side plate numbers are upside-down.	4	33.33%
My Luger is a factory-original finish.	2	16.67%
My Luger is an Ordnance asensal rework or other rework.	2	16.67%
My luger has another numbering format on the TD lever & side plate (Please describe in discussion section, below.).	0	0%
I do not own a Swiss Luger but want to see the Poll results	6	50.00%
Multiple Choice Poll. Voters: 12. You may not vote on this poll

04-29-2007, 04:45 PM	#1
Pete Ebbink User Join Date: Jun 2002 Location: The USA Posts: 5,919 Thanks: 0 Thanked 7 Times in 5 Posts	POLL - M1906 DWM-Swiss Cross/Sunburst Lugers Please join us in helping provide some info. about your M1906 DWM-Swiss Luger (Cross/Sunburst variety only). I am helping Members Mike and Armin to establish if a variety in the numbering of the TD levers and the trigger side plate exist and came from the factory. Most commercial contract Lugers will have the 2-digits of the TD lever and the trigger side plate placed on the bottom edge with the tops of these numbers pointing away from the side of the pistol (...I call this rightside-up). Mike, Armin, and others theorize that some of these M1906 DWM-Swiss cross/sunburst lugers left the factory with un-numbered TD levers and the 2 digits on the trigger side plate upside-down...that is with the tops of their numbers pointing towards the side of the pistol. If you own a M1906 DWM-Swiss cross/sunburst Luger, please take a moment and fill out the Poll. Please remember to indicate if you think your Luger is in a factory-original condition or a Swiss Ordnance rework or other rework. Thanks in advance for your help !!!