1916 DWM Ammunition

Mike K. · 04-14-2007, 07:32 AM

Greetings!
Can someone please tell me a good brand of 9mm current ammunition to purchase for firing in a 1916 DWM? Is the shell casing the same length as original ammunition?
Thanks!

stefanosg · 04-14-2007, 08:48 AM

Most people stick with the Winchester white box. Just don't use hollow points or flat nosed bullets. Stick with a good fully jacketed round nose bullet. 115g will work, but I've heard they prefer the 124g weight bullets. The shell casing are the same.

Sieger · 04-14-2007, 10:54 AM

Quote:

Originally posted by Mike K.
Greetings!
Can someone please tell me a good brand of 9mm current ammunition to purchase for firing in a 1916 DWM? Is the shell casing the same length as original ammunition?
Thanks!

Hi:

A lot will depend on the condition of your recoil and magazine springs. If one or both of these is worn or out of spec., you will be in for a jamomatic Luger.

To really get the total potential out of a Luger, you have to reload for it, as none of the current ammo is within original spec.

Sieger

Mike K. · 04-15-2007, 10:40 PM

Thanks for the great info guys! By the way, the takedown lever was not serial numbered on my 1916 DWM mentioned here. I attached an image of the lever that came with it. It does have some sort of inspector's stamp. Were all takedown levers also serial numbered to the Lugers? This was a vet bring back that was not messed with. It could be a period replacement.
Thanks

lugerholsterrepair · 04-15-2007, 11:23 PM

This takedown lever is off of an Erfurt Pistol. Jerry Burney

Dwight Gruber · 04-16-2007, 02:56 AM

Mike,

It is likely that your inspector stamped but unnumbered takedown lever is an armorer's replacement spare.

--Dwight

Mike K. · 04-16-2007, 07:11 PM

Thanks again guys for the great info! The takedown lever is the only part not matching. The grips match as well. Would a mismatched lever detract greatly from the value? At least it is an original! This is my 1916 DWM. First one!
Thanks.

04-14-2007, 07:32 AM	#1
Mike K. User Join Date: Apr 2007 Location: Tallahassee, FL Posts: 37 Thanks: 0 Thanked 1 Time in 1 Post	1916 DWM Ammunition Greetings! Can someone please tell me a good brand of 9mm current ammunition to purchase for firing in a 1916 DWM? Is the shell casing the same length as original ammunition? Thanks!

04-14-2007, 08:48 AM	#2
stefanosg User Join Date: Jan 2006 Location: East Central Florida Posts: 367 Thanks: 1 Thanked 7 Times in 2 Posts	Most people stick with the Winchester white box. Just don't use hollow points or flat nosed bullets. Stick with a good fully jacketed round nose bullet. 115g will work, but I've heard they prefer the 124g weight bullets. The shell casing are the same. __________________ "When the people fear their government, there is tyranny; when the government fears the people, there is liberty."

04-15-2007, 10:40 PM	#4
Mike K. User Join Date: Apr 2007 Location: Tallahassee, FL Posts: 37 Thanks: 0 Thanked 1 Time in 1 Post	Thanks for the great info guys! By the way, the takedown lever was not serial numbered on my 1916 DWM mentioned here. I attached an image of the lever that came with it. It does have some sort of inspector's stamp. Were all takedown levers also serial numbered to the Lugers? This was a vet bring back that was not messed with. It could be a period replacement. Thanks Attached Images

04-15-2007, 11:23 PM	#5
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,775 Thanks: 4,995 Thanked 3,133 Times in 1,439 Posts	This takedown lever is off of an Erfurt Pistol. Jerry Burney __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

04-16-2007, 07:11 PM	#7
Mike K. User Join Date: Apr 2007 Location: Tallahassee, FL Posts: 37 Thanks: 0 Thanked 1 Time in 1 Post	Thanks again guys for the great info! The takedown lever is the only part not matching. The grips match as well. Would a mismatched lever detract greatly from the value? At least it is an original! This is my 1916 DWM. First one! Thanks. Attached Thumbnails

04-16-2007, 02:56 AM	#6
Dwight Gruber User Join Date: Jun 2002 Location: Portland, Oregon Posts: 3,908 Thanks: 0 Thanked 1,330 Times in 435 Posts	Mike, It is likely that your inspector stamped but unnumbered takedown lever is an armorer's replacement spare. --Dwight