Luger original finish question

Matt · 02-20-2001, 10:07 PM

I've got a byf Luger on the way and am in need of tips to determine if finish is original. Other than the obvious such as pitting, uneven surface and buffed markings, is there anything else I need to look for? I do have an original code 42 to compare it to. Any tips you guys can give me will be appreciated.

BILL · 02-21-2001, 12:21 AM

One thing that I noticed on a really nice reblue was some very slight pitting around the serial numbers and proofs. This was done, I think, to avoid 'brushing' the edges of the stampings. The rest of the pistol had no apparent pitting anywhere but looking closely at the stampings, one could detect fairly deep blued pits. (Just one thing I once noticed).

Marvin · 02-21-2001, 06:44 AM

Matt,

A good restoration is sometimes difficult to determine, but on a "byf" or the later salt blued pistols,look at it under different light sources. Sunlight, incandecent, flourescent, etc. and see if you can notice any odd changes in the bluing. Another thing is the blue wear pattern on the pistol. These seen to be fairly consistant from being held and in/out of the holster. This wear can be faked, but it is difficult to do and make it appear correct. Keep us informed of the pistol when it arrives.

Marvin

Matt · 02-22-2001, 10:16 PM

Marvin and Bill,

Thanks for the info. I expect to have the Luger next week. I'll let you know when it arrives.

02-20-2001, 10:07 PM	#1
Matt User Join Date: Oct 2002 Posts: 196 Thanks: 0 Thanked 0 Times in 0 Posts	Luger original finish question I've got a byf Luger on the way and am in need of tips to determine if finish is original. Other than the obvious such as pitting, uneven surface and buffed markings, is there anything else I need to look for? I do have an original code 42 to compare it to. Any tips you guys can give me will be appreciated.

02-21-2001, 12:21 AM	#2
BILL User Join Date: Jun 2002 Location: Western Washington Posts: 826 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Luger original finish question One thing that I noticed on a really nice reblue was some very slight pitting around the serial numbers and proofs. This was done, I think, to avoid 'brushing' the edges of the stampings. The rest of the pistol had no apparent pitting anywhere but looking closely at the stampings, one could detect fairly deep blued pits. (Just one thing I once noticed).

02-21-2001, 06:44 AM	#3
Marvin User Join Date: Jun 2002 Location: Upstate S.C. Posts: 1,132 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Luger original finish question Matt, A good restoration is sometimes difficult to determine, but on a "byf" or the later salt blued pistols,look at it under different light sources. Sunlight, incandecent, flourescent, etc. and see if you can notice any odd changes in the bluing. Another thing is the blue wear pattern on the pistol. These seen to be fairly consistant from being held and in/out of the holster. This wear can be faked, but it is difficult to do and make it appear correct. Keep us informed of the pistol when it arrives. Marvin

02-22-2001, 10:16 PM	#4
Matt User Join Date: Oct 2002 Posts: 196 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Luger original finish question Marvin and Bill, Thanks for the info. I expect to have the Luger next week. I'll let you know when it arrives.