![]() |
my profile |
register |
faq |
search upload photo | donate | calendar |
![]() |
#1 |
Moderator
Lifetime Forum Patron Join Date: Jun 2002
Location: Arizona/Colorado
Posts: 7,775
Thanks: 4,995
Thanked 3,133 Times in 1,439 Posts
|
![]()
Anyone care to venture an opinion on these items? I will post mine in a day or two...
Lugerlover was kind enough to bring this to my attention, Thanks Bill. http://www.auctionarms.com/search/di...temnum=6620944
__________________
Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) ![]() "For those who Fight For It, Life has a flavor the protected will never know." |
![]() |
![]() |
![]() |
#2 |
Super Moderator
Eternal Lifer LugerForum Patron Join Date: Jun 2002
Location: North of Spokane, WA
Posts: 15,966
Thanks: 2,066
Thanked 4,595 Times in 2,116 Posts
|
![]()
I was under the impression that molds were made of wood?
They look possible and/or real, but don't know. Ed |
![]() |
![]() |
![]() |
#3 |
RIP
Join Date: Jun 2002
Location: Dc 'burbs in Virginia
Posts: 2,482
Thanks: 0
Thanked 16 Times in 10 Posts
|
![]()
While in germany in the 19700's, I encountered several belt buckle dies that were "reverse" engraved. They were always steel and done in layers.
Why would one want to do molds in brass? Guess, I am either too ignorant or too skeptical. Tom A. |
![]() |
![]() |
![]() |
#4 |
User
Join Date: Feb 2004
Location: Orygun
Posts: 4,243
Thanks: 118
Thanked 245 Times in 150 Posts
|
![]()
Tom ,
Brass heats and cools faster than steel and doesn't rust. I would think that mild heat and/or steam would be used in forming the leather. They look legit to me... Ron
__________________
I Still Need DWM side plate #49... if anyone runs across a nice one. What ~Rudyard Kipling~ said... |
![]() |
![]() |
![]() |
#5 |
User
Join Date: Jan 2003
Location: Murfreesboro
Posts: 502
Thanks: 0
Thanked 2 Times in 2 Posts
|
![]()
I don't like the welds on the dies. Don't know anything about this kind of set up or how holster were assembled or anything about any of these pieces other than the welds and grinding look like a high school shop class project.
__________________
"There are three reasons to own a gun: To protect yourself and your family, to hunt dangerous and delicious animals, and to keep the King of England out of your face." ΓΆ?? Krusty the Clown |
![]() |
![]() |
![]() |
#6 |
User
Join Date: Jun 2002
Location: Greenville SC
Posts: 1,004
Thanks: 377
Thanked 411 Times in 180 Posts
|
![]()
You would make the molds in brass because you can cheaply sand cast it. The cutting dies are bent and welded because that is the cheapest way to do that process. I believe these scream VOPO and have nothing to do original Imperial or Wehrmacht production.
Jerry, is heat used in leather molding? I always thought it was wet leather and pressure on the forming dies but I do not know. |
![]() |
![]() |
![]() |
#7 |
Moderator
Lifetime Forum Patron Join Date: Jun 2002
Location: Arizona/Colorado
Posts: 7,775
Thanks: 4,995
Thanked 3,133 Times in 1,439 Posts
|
![]()
Gentlemen I will give you my opinion of this set of tools.
As many of you are aware I have been studying the manufacture of Luger holsters for some time now and have actually made many hardshell Luger holsters. Mostly Imperial 6" Navy and Baby Luger holsters. There is little that is known about the actual German process of mass producing Luger holsters. Much has been lost to time or never recorded properly so we could observe the process in any detail. Having replicated the hardshell myself I went through quite a learning process on how to achieve an excellent end result and some of the pitfalls along the way. As for the brass molds, I cannot for the life of me see that these could be of any use whatsoever. When making a hardshell holster it is necessary to dry the leather very fast as leather hardens when treated this way. Also mold grows very quickly on vegatable tanned leather, in a matter of minutes or hours. Putting wet leather in these brass molds is not suitable at all to draw moisture off of leather. It would trap it inside the mold even were it to be heated. Trapped in this brass mold there is no where for it to go...Cooking leather at a high temperature would ruin it. Why use heat anyway as air drying is much cheaper, faster and does not require workers to heft around hot heavy brass molds. I believe the Germans used a wooden mold with a skelatal framework type press on top to mold the hardshell. This would enable the wood mold to wick away water and the exposed front to evaporate. I have had great success with this method myself. A holster will dry enough to remove in a matter of a few hours. It is fast light and quickly achieves results without burning fossil fules. The cutting dies shown bother me to some extent. They seem to want to cut out exact patterns of the holster back, inside liner etc. From my experience it is necessary to leave some overlap and excess for the body and back to adjust and correctly stitch the edges. The Germans did this with a sewing machine and it would be impossible to stitch along the edge of a Luger holster with such precision. There would also be no place for the presser foot of the sewing machine. I believe the holsters were made with some excess and trimmed to the edge. Another point to notice is when a German holster pattern was made there are little pin point holes in many places you may not notice. They are markers for placement of the small parts such as belt loops, stock blocks or magazine pouches. The German Saddler needed to know where these were placed and these little pin holes pointed out where. These do not appear on the cutting dies that I can see. Look on any German holster at the corners of mag pouches or around any small part and you will notice them. The wooden magazine dies shown may or may not be authentic. I cannot see them well enough to determine if they are of any use. The little bit of what appears to be German writing lends nothing to it's authenticity in my opinion. From what little I know and have experienced this is a pile of junk. The sale got up to over $700.00. I guarentee I can show the same result for $7.00. Jerry Burney
__________________
Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) ![]() "For those who Fight For It, Life has a flavor the protected will never know." |
![]() |
![]() |
![]() |
|
|