Pebble holster

LU1900 · 03-03-2005, 10:49 AM

Hello alls

I need your advice about this civil holster for a 4 3/4 barrel

There's a button snap for the loadind tool stamped:
J.H.H .star. C.S.star. in cercle
And the top seems like found on double magazine pouch from Netherlands

Somebody must reduce the pics I think for the post
Thanks for yours opinions

lugerholsterrepair · 03-03-2005, 11:22 AM

A beautiful example and seems correct in every way...I just had another commercial in here for a small repair and it had the same pointed top flap on the tool pouch.
What advice are you wanting exactly?
Jerry Burney

George Anderson · 03-03-2005, 11:38 AM

Patrice, like Jerry says, it's a great commercial holster. I also might point out that it is not pebble grained but rather seems to be pig skin which makes it even more desireable. A valuable holster.

lugerholsterrepair · 03-03-2005, 08:18 PM

George is absolutely correct, I forgot to mention it. I would say it is in the $700-$900 catagory. It has the cleaning rod sleeve attached close to the magazine pouch but no provision for the pin punch next to the interior tool pouch like I have seen on many others. The hinge is particulary pristine, the whole holster is in amazing condition. A real find. Notice the leather covered buckle....Do you have an opportunity to purchase this holster? Jerry Burney

Ron Wood · 03-04-2005, 12:12 AM

That is easily one of the most stunning holsters I have seen in quite a while, a real treasure and outstanding collector's piece. I hope you can acquire it Patrice, it deserves a good home.

Vlim · 03-04-2005, 12:31 PM

Hi,

Nice one. Are there any stampings on one or either rings of the pushbutton assembly?

LU1900 · 03-05-2005, 09:18 AM

Yes on the snap button there's stamped only five letters .J.H.H. and .C.S.

Vlim · 03-05-2005, 10:44 AM

Hi,

Thanks. These markings have been reported before on other 'commercial' equipment.

I believe they point towards a button factory in former Czecho-Slowakia (hence the C.S.).

Reported:
JHH * CS * (pre-1918)

RG (ca 1918-1925?)

KM (ca 1930-1940?)

A possible button-producer may be Josef Haase from Peterswald, in a disputed CS/German area.

LU1900 · 03-05-2005, 10:54 AM

Quote:

Originally posted by G. van Vlimmeren
Hi,

Thanks. These markings have been reported before on other 'commercial' equipment.

I believe they point towards a button factory in former Czecho-Slowakia (hence the C.S.).

Reported:
JHH * CS * (pre-1918)

Hi,
Thanks to you it is this one : pre-1918

And now this holster is at home

Ron Wood · 03-05-2005, 11:22 PM

Wonderful! Glad you got it. I am envious! Congratulations

03-03-2005, 10:49 AM	#1
LU1900 User Join Date: Jul 2003 Location: FRANCE Posts: 912 Thanks: 46 Thanked 473 Times in 199 Posts	Pebble holster Hello alls I need your advice about this civil holster for a 4 3/4 barrel There's a button snap for the loadind tool stamped: J.H.H .star. C.S.star. in cercle And the top seems like found on double magazine pouch from Netherlands Somebody must reduce the pics I think for the post Thanks for yours opinions

03-03-2005, 11:22 AM	#2
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,775 Thanks: 4,995 Thanked 3,133 Times in 1,439 Posts	A beautiful example and seems correct in every way...I just had another commercial in here for a small repair and it had the same pointed top flap on the tool pouch. What advice are you wanting exactly? Jerry Burney __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

03-03-2005, 08:18 PM	#4
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,775 Thanks: 4,995 Thanked 3,133 Times in 1,439 Posts	George is absolutely correct, I forgot to mention it. I would say it is in the $700-$900 catagory. It has the cleaning rod sleeve attached close to the magazine pouch but no provision for the pin punch next to the interior tool pouch like I have seen on many others. The hinge is particulary pristine, the whole holster is in amazing condition. A real find. Notice the leather covered buckle....Do you have an opportunity to purchase this holster? Jerry Burney __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

03-04-2005, 12:12 AM	#5
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 7,040 Thanks: 1,106 Thanked 5,257 Times in 1,724 Posts	That is easily one of the most stunning holsters I have seen in quite a while, a real treasure and outstanding collector's piece. I hope you can acquire it Patrice, it deserves a good home. __________________ If it's made after 1918...it's a reproduction

03-05-2005, 09:18 AM	#7
LU1900 User Join Date: Jul 2003 Location: FRANCE Posts: 912 Thanks: 46 Thanked 473 Times in 199 Posts	Yes on the snap button there's stamped only five letters .J.H.H. and .C.S. __________________ Best regards from France...Patrice https://www.fichier-pdf.fr/2016/03/1...nd-snail-drum/

03-03-2005, 11:38 AM	#3
George Anderson Lifer Lifetime Forum Patron Join Date: Jul 2002 Location: VA Posts: 3,592 Thanks: 1,773 Thanked 2,531 Times in 788 Posts	Patrice, like Jerry says, it's a great commercial holster. I also might point out that it is not pebble grained but rather seems to be pig skin which makes it even more desireable. A valuable holster.

03-04-2005, 12:31 PM	#6
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,053 Thanks: 1,036 Thanked 3,990 Times in 1,205 Posts	Hi, Nice one. Are there any stampings on one or either rings of the pushbutton assembly?

03-05-2005, 10:44 AM	#8
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,053 Thanks: 1,036 Thanked 3,990 Times in 1,205 Posts	Hi, Thanks. These markings have been reported before on other 'commercial' equipment. I believe they point towards a button factory in former Czecho-Slowakia (hence the C.S.). Reported: JHH * CS * (pre-1918) RG (ca 1918-1925?) KM (ca 1930-1940?) A possible button-producer may be Josef Haase from Peterswald, in a disputed CS/German area.

03-05-2005, 11:22 PM	#10
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 7,040 Thanks: 1,106 Thanked 5,257 Times in 1,724 Posts	Wonderful! Glad you got it. I am envious! Congratulations __________________ If it's made after 1918...it's a reproduction