![]() |
my profile |
register |
faq |
search upload photo | donate | calendar |
![]() |
#1 |
User
Join Date: Jul 2018
Location: Nellis AFB NV
Posts: 52
Thanks: 55
Thanked 11 Times in 9 Posts
|
![]()
Good morning all,
Happy to be new to the Luger forum as I now have my Dad's Luger back!! After looking at this forum and photos here, it is clear once again that "maintenance, care and feeding" was NOT one of my dad's strong suits!! I poured over the markings in this pdf catalog https://www.selfdefensefund.com/wp-c...7/09/Luger.pdf but not much help. There is adequate matching of the S/N 3825 (25s) throughout the mainbody but things get sketchy after that...Standard DWM across the top and then things begin to unravel. No S/N on the barrel, two proofs that I can't make out on the barrel along with the calibre (7.65). Trying to upload photos, here's link to imgur for album there. https://imgur.com/a/qmTkMvV Imgur photos will be larger, better for zooming. If I could get some feedback on the ID of the gun would be thankful. Will gladly post additional photo, zoomed/macro'd as necessary to help anyone kind enough to help me. Some provenance on the gun; family from France, fled to North Africa during WWII, returned to France later. I know my father had the gun in the US for past 55 yrs. Don't know if he got it in Europe Post-War, picked up during war? And everyone is dead now so can't ask them. Finally, will break down gun and clean and start to refurbish.....If I could also ask that you list the first 3 things you would do regarding getting this luger back in health. Thanks in advance |
![]() |
![]() |
![]() |
#2 |
User
Join Date: Apr 2015
Location: near Charlotte NC
Posts: 4,681
Thanks: 1,441
Thanked 4,350 Times in 2,040 Posts
|
![]()
How about a picture of the top of the chamber? And a better picture of the circular marking on the right side of the receiver.
So far, I can see the DWM receiver was re-barreled commercially and re-proved in Germany. The E/N is a nitro proof, and the E/J an indication of re-buliding/replacement of the barrel.
__________________
03man(Don Voigt); Luger student and collector. Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie |
![]() |
![]() |
The following 2 members says Thank You to DonVoigt for your post: |
![]() |
#3 |
Lifetime Forum
Patron Join Date: Sep 2013
Location: Fairbanks, Alaska. Home of the best moose.
Posts: 650
Thanks: 354
Thanked 1,167 Times in 388 Posts
|
![]()
It actually looks like a pretty good commercial 30cal. to me. I wouldn't do anything but a thorough disassembly and cleaning. I wouln't "refurbish" anything. Remember Antiques roadshow... 10 percent original finish is better than 100 percent refinish.
|
![]() |
![]() |
The following member says Thank You to gunbugs for your post: |
![]() |
#4 | |
User
Join Date: Jul 2018
Location: Nellis AFB NV
Posts: 52
Thanks: 55
Thanked 11 Times in 9 Posts
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#5 | |
User
Join Date: Jul 2018
Location: Nellis AFB NV
Posts: 52
Thanks: 55
Thanked 11 Times in 9 Posts
|
![]() Quote:
Disassembled, lots of lithium grease!?, cleaned reassembled, now hunting .30 Luger ammo locally. |
|
![]() |
![]() |
The following member says Thank You to F15E_WSO for your post: |
![]() |
#6 |
Patron
LugerForum Patron Join Date: Nov 2008
Posts: 4,047
Thanks: 578
Thanked 1,414 Times in 887 Posts
|
![]()
I'd go straight to on-line sources for .30 Luger, maybe Gunbroker.com, etc. Cheaper, about as fast, more variety, etc.
dju |
![]() |
![]() |
The following member says Thank You to DavidJayUden for your post: |
![]() |
#7 |
User
Join Date: Jul 2018
Location: Nellis AFB NV
Posts: 52
Thanks: 55
Thanked 11 Times in 9 Posts
|
![]()
David, I've ID'd a few via AmmoSeek but before I pay $15 in shipping on a box of 50 I'm hoping to get a single box locally and ensure the gun works. Once I know it works then I will buy online most likely.
|
![]() |
![]() |
![]() |
#8 |
User
Join Date: Apr 2015
Location: near Charlotte NC
Posts: 4,681
Thanks: 1,441
Thanked 4,350 Times in 2,040 Posts
|
![]()
Top of the chamber is just that, toggle open or closed your choice.
should be some markings there, unless removed.
__________________
03man(Don Voigt); Luger student and collector. Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie |
![]() |
![]() |
![]() |
#9 |
Patron
LugerForum Patron Join Date: Jun 2002
Location: POB 398 St.Charles,MO. 63302
Posts: 5,089
Thanks: 6
Thanked 736 Times in 483 Posts
|
![]()
Judging from the markings on the right chamber area, this pistol was never completed by DWM during WW1, rather the parts were assembled later (after 1939) by a licensed German gunsmith, showing an overabundance of his test firing proofs. The circular marking, with the cross swords, is a British proof house markings, that was required to sell foreign made pistols in GB. TH
|
![]() |
![]() |
The following member says Thank You to Lugerdoc for your post: |
![]() |
#10 | |
User
Join Date: Jul 2018
Location: Nellis AFB NV
Posts: 52
Thanks: 55
Thanked 11 Times in 9 Posts
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#11 | |
User
Join Date: Jul 2018
Location: Nellis AFB NV
Posts: 52
Thanks: 55
Thanked 11 Times in 9 Posts
|
![]() Quote:
Link to imgur album https://imgur.com/a/tkewOEA |
|
![]() |
![]() |
The following member says Thank You to F15E_WSO for your post: |
![]() |
#12 |
Lifetime Forum
Patron Join Date: Sep 2013
Location: Fairbanks, Alaska. Home of the best moose.
Posts: 650
Thanks: 354
Thanked 1,167 Times in 388 Posts
|
![]()
The only thing I see that is really out of place is the mismatch rear toggle.
|
![]() |
![]() |
The following member says Thank You to gunbugs for your post: |
![]() |
#13 |
Super Moderator
Eternal Lifer LugerForum Patron Join Date: Jun 2002
Location: North of Spokane, WA
Posts: 15,924
Thanks: 2,012
Thanked 4,517 Times in 2,087 Posts
|
![]()
So, what I see is a DWM luger, made WWI era, later rebarreled into 30 luger, with lots of interesting acceptance and proof markings.
__________________
Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV |
![]() |
![]() |
The following member says Thank You to Edward Tinker for your post: |
![]() |
#14 |
User
Join Date: Apr 2015
Location: near Charlotte NC
Posts: 4,681
Thanks: 1,441
Thanked 4,350 Times in 2,040 Posts
|
![]()
As Ed says, I'll add that the receiver is from an artillery luger.
The proof marks of E/N and E/J are according to the German law proof law of 1940. So this re-work/re-build of a WWI era luger was done after 1940 and before 1945. Large and small factories were doing these "re-works" and the circle on the right of the receiver is likely a trademark or maker/seller mark from the 1940 era(JMHO). Vono and Anchutz were large concerns doing this- but this is not their mark. It IS Luneschloss; (but I do not recognize the mark and have not seen it before). Update: 8-18-2018, Klaus says it is Franken and Luneschloss, see post below! I do not believe it is a British/English proof mark, as it is not the correct size, style or location- though it could be a retailer mark- and would have to post date the 1940 time frame of the pistol if English- later than 1946.
__________________
03man(Don Voigt); Luger student and collector. Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie |
![]() |
![]() |
The following 2 members says Thank You to DonVoigt for your post: |
![]() |
#15 |
Patron
LugerForum Patron Join Date: Jun 2002
Location: POB 398 St.Charles,MO. 63302
Posts: 5,089
Thanks: 6
Thanked 736 Times in 483 Posts
|
![]()
After further thought, i agree with Don above. TH
|
![]() |
![]() |
![]() |
#16 |
User
Join Date: Jul 2018
Location: Nellis AFB NV
Posts: 52
Thanks: 55
Thanked 11 Times in 9 Posts
|
![]()
Thanks to all for the help and inputs here.
|
![]() |
![]() |
![]() |
#17 |
Lifer 2X
Lifetime Forum Patron Join Date: May 2005
Location: Somewhere in Montana
Posts: 2,625
Thanks: 3,165
Thanked 2,543 Times in 949 Posts
|
![]()
I agree it is not an English proof mark.
__________________
Bill Lyon |
![]() |
![]() |
The following member says Thank You to wlyon for your post: |
![]() |
#18 |
User
Join Date: Jun 2009
Location: Germany
Posts: 517
Thanks: 0
Thanked 411 Times in 160 Posts
|
![]()
...reworked by Franken und Lünenschloß
|
![]() |
![]() |
![]() |
#19 |
User
Join Date: Feb 2013
Location: Somewhere in Northern Italy
Posts: 2,646
Thanks: 1,082
Thanked 1,783 Times in 1,007 Posts
|
![]()
Interesting pistol, with all those acceptance and proof markings too bad it can't talk.
__________________
"Originality can't be restored and should be at the top of any collector's priority list. |
![]() |
![]() |
The following member says Thank You to Sergio Natali for your post: |
![]() |
#20 |
User
Join Date: Jul 2018
Location: Nellis AFB NV
Posts: 52
Thanks: 55
Thanked 11 Times in 9 Posts
|
![]() |
![]() |
![]() |
![]() |
Tags |
7.65mm, dwm, proof |
|
|