Receiver Wrench

The Wizard · 11-20-2002, 11:24 AM

I know it is important to have a properly fitted receiver wrench when removing and installing Luger barrels. Does anyone have a dimensioned drawing of such a wrench? If so contact me so that I may get a copy of it.

John Sabato · 11-20-2002, 03:19 PM

Wiz,

I don't think I have seen a dimensioned drawing for a Luger receiver wrench, but several designs have been discussed and photos have been posted.

Use the search function (top right corner of this page) looking for the work "wrench" and you should find some good information on design.

If you have a Luger to measure from, and the know how to machine a wrench just for fun, then you should be able to build it without a thought for cost because most of the cost is in the labor not the materials.

Removing Luger barrels is not a job for the faint-hearted... Most all have been attached for better than 50 years and some for as long as 100 years...If you are not an experienced gunsmith, then I don't recommend you try this at home... One mistake, or one slip and your Luger receiver is marred forever.

Art · 12-20-2002, 08:02 PM

.Seems that this is a never ending question on this and old forum. Last year I put together about a 10 page discertation, drawing and photos of tools to make and method for removing barrels. I sent it out to a few who ask. One guy set me $20 for my time. I have some experience before Thor and others got here. Would estimate that I have removed and replaced at least 100 and only scratched one or two. Not a big secret--only takes right tools and some mechanical skill. Less than $30 worth of material and a bit of work can make the tools without anything more than a drill press. Could be done with an electric drill, file and a hacksaw

G.T. · 12-22-2002, 09:05 AM

Hello to all! I received the same info. from Art as Rick did! It is very clear that Art has been around this game for quite a while! His info. is good and his knowledge extensive! I have also seen pictures of his work, (babies & carbines!)and it is outstanding! Thanks Art, Best to you and a happy holiday season! till...later....G.T. <img src="graemlins/jumper.gif" border="0" alt="[jumper]" />

John Sabato · 12-31-2002, 11:50 AM

Hey Art,

I am sure that many Forum members would appreciate having access to fruits of your efforts and experience...

May I officially request that you post the information that you authored on Luger barrel removal as an album in the Member Gallery... I would be glad to assist you to do this if you are so inclined. Please contact me via Private Message about the details.

11-20-2002, 11:24 AM	#1
The Wizard User Join Date: Jun 2002 Location: Colorado Springs, Colorado Posts: 67 Thanks: 0 Thanked 0 Times in 0 Posts	Receiver Wrench I know it is important to have a properly fitted receiver wrench when removing and installing Luger barrels. Does anyone have a dimensioned drawing of such a wrench? If so contact me so that I may get a copy of it. __________________ The Wizard Air Dropable AND Ground Recoverable Necat omnes! Deus suos agnoscet. The application of the proper amount of high explosives can solve any problem. War is an act of force and to the application of that force there is no limit! So say the philosophers (Carl von Clausewitz b 1780 d 1831) of war.

11-20-2002, 03:19 PM	#2
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,150 Thanks: 3,003 Thanked 2,304 Times in 1,096 Posts	Wiz, I don't think I have seen a dimensioned drawing for a Luger receiver wrench, but several designs have been discussed and photos have been posted. Use the search function (top right corner of this page) looking for the work "wrench" and you should find some good information on design. If you have a Luger to measure from, and the know how to machine a wrench just for fun, then you should be able to build it without a thought for cost because most of the cost is in the labor not the materials. Removing Luger barrels is not a job for the faint-hearted... Most all have been attached for better than 50 years and some for as long as 100 years...If you are not an experienced gunsmith, then I don't recommend you try this at home... One mistake, or one slip and your Luger receiver is marred forever. __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

12-31-2002, 11:50 AM	#5
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,150 Thanks: 3,003 Thanked 2,304 Times in 1,096 Posts	Hey Art, I am sure that many Forum members would appreciate having access to fruits of your efforts and experience... May I officially request that you post the information that you authored on Luger barrel removal as an album in the Member Gallery... I would be glad to assist you to do this if you are so inclined. Please contact me via Private Message about the details. __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

12-20-2002, 08:02 PM	#3
Art User Join Date: Jun 2002 Location: missouri Posts: 32 Thanks: 0 Thanked 0 Times in 0 Posts	.Seems that this is a never ending question on this and old forum. Last year I put together about a 10 page discertation, drawing and photos of tools to make and method for removing barrels. I sent it out to a few who ask. One guy set me $20 for my time. I have some experience before Thor and others got here. Would estimate that I have removed and replaced at least 100 and only scratched one or two. Not a big secret--only takes right tools and some mechanical skill. Less than $30 worth of material and a bit of work can make the tools without anything more than a drill press. Could be done with an electric drill, file and a hacksaw

12-22-2002, 09:05 AM	#4
G.T. Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: Chandler Arizona Posts: 3,486 Thanks: 1,283 Thanked 3,583 Times in 989 Posts	Hello to all! I received the same info. from Art as Rick did! It is very clear that Art has been around this game for quite a while! His info. is good and his knowledge extensive! I have also seen pictures of his work, (babies & carbines!)and it is outstanding! Thanks Art, Best to you and a happy holiday season! till...later....G.T. <img src="graemlins/jumper.gif" border="0" alt="[jumper]" />