Walther P1 troubles

Kohaku2416 · 12-22-2005, 10:08 PM

Earlier today a friend and i were out back shooting some coke cans with his Walther P1 that he got for his 16th birthday. When all of a sudden the gun started jamming. Like really bad, every other shot was a jam. When it got even worse, In one of the jams the bullet got stuck in the feed ramp and the nose of the bullet got lodged in the upper part of the barrel and to top it off the slide slammed shot on the case while it was half stuck in the mag. It took us a good twenty minutes before we could un jam the gun and when we tossed the bullet it went off in the back part of the woods. We dont know whats causing it and he's all freaked out thinking his gun is broken. Does anyone know whats going on and if so can you help us out?

policeluger · 12-22-2005, 11:04 PM

Sounds like the tossed bullet hit a rock or such on the primer and caused it to go off, have a sample or two of that same thing around....also I have seem the P1 version crack the frame, sending everything a few thousands kilter....also ammo could be an issue...hope I was of help. gone for a few days now, let me know if I can help.......PL

Lugerdoc · 12-23-2005, 10:00 AM

Kohaku, You friend's jam could be the result of weak ammo, bad mag lips, etc. But I would also clean the P1 throughly and check the slide for cracks in the area cut out for the locking block. TH

Fritzer · 12-23-2005, 10:36 AM

You may also want to look at the sister forum www.p38forum.com
Many members participate in both, but there are tech areas and discussions on the P38's and P1's over there.

Regards,
Fritz.

Thor · 12-23-2005, 01:18 PM

As a side note, a good P.38 slide will ring like a tuning fork almost forever when stripped of it small parts and held with a thumb and finger at the back cocking serations and thumped at the front with ones thumb. The ringing on a slide with even an internal crack will dampen out and stop ringing more quickly.

Kohaku2416 · 12-25-2005, 04:41 PM

Well my friend is tired of his Walther so he says. Plus he wants the money to get a new Ipod Video " which by the way is a sweet little gaget" Soooo i went and relieved him of his Walther for the total cost of $200. hmm I guess it's my problem now to get it fixed. >_<

Just thought i would let everyone know who was aware of his or shall i say my problem now.

12-22-2005, 10:08 PM	#1
Kohaku2416 User Join Date: Oct 2004 Location: Muncie Indiana Posts: 124 Thanks: 0 Thanked 4 Times in 2 Posts	Walther P1 troubles Earlier today a friend and i were out back shooting some coke cans with his Walther P1 that he got for his 16th birthday. When all of a sudden the gun started jamming. Like really bad, every other shot was a jam. When it got even worse, In one of the jams the bullet got stuck in the feed ramp and the nose of the bullet got lodged in the upper part of the barrel and to top it off the slide slammed shot on the case while it was half stuck in the mag. It took us a good twenty minutes before we could un jam the gun and when we tossed the bullet it went off in the back part of the woods. We dont know whats causing it and he's all freaked out thinking his gun is broken. Does anyone know whats going on and if so can you help us out?

12-23-2005, 10:00 AM	#3
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	Kohaku, You friend's jam could be the result of weak ammo, bad mag lips, etc. But I would also clean the P1 throughly and check the slide for cracks in the area cut out for the locking block. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

12-23-2005, 10:36 AM	#4
Fritzer User Join Date: Nov 2002 Location: Michigan Posts: 134 Thanks: 0 Thanked 0 Times in 0 Posts	http://www.p38forum.com You may also want to look at the sister forum www.p38forum.com Many members participate in both, but there are tech areas and discussions on the P38's and P1's over there. Regards, Fritz.

12-23-2005, 01:18 PM	#5
Thor User Join Date: Jun 2002 Location: Rio Rancho, New Mexico Posts: 4,583 Thanks: 958 Thanked 970 Times in 276 Posts	As a side note, a good P.38 slide will ring like a tuning fork almost forever when stripped of it small parts and held with a thumb and finger at the back cocking serations and thumped at the front with ones thumb. The ringing on a slide with even an internal crack will dampen out and stop ringing more quickly. __________________ Thor's Luger Clinic http://members.rennlist.com/lugerman/ Ted Green (Thor Yaller Boots) 725 Western Hills Dr SE, Rio Rancho, NM 87124 915-526-8925 Email thor340@aol.com ----------------------------------- John3:3 Jesus answered and said to him, "Most assuredly, I say to you, unless one is born again, he cannot see the kingdom of God."

12-25-2005, 04:41 PM	#6
Kohaku2416 User Join Date: Oct 2004 Location: Muncie Indiana Posts: 124 Thanks: 0 Thanked 4 Times in 2 Posts	My gun now Well my friend is tired of his Walther so he says. Plus he wants the money to get a new Ipod Video " which by the way is a sweet little gaget" Soooo i went and relieved him of his Walther for the total cost of $200. hmm I guess it's my problem now to get it fixed. >_< Just thought i would let everyone know who was aware of his or shall i say my problem now.

12-22-2005, 11:04 PM	#2
policeluger RIP Join Date: Jun 2002 Location: Ca. Posts: 2,141 Thanks: 8 Thanked 89 Times in 54 Posts	Sounds like the tossed bullet hit a rock or such on the primer and caused it to go off, have a sample or two of that same thing around....also I have seem the P1 version crack the frame, sending everything a few thousands kilter....also ammo could be an issue...hope I was of help. gone for a few days now, let me know if I can help.......PL