Fires, Loads, Does Not ****

ViggoG · 11-26-2005, 11:47 PM

Sounds to me like a worn sear / Firing pin engagement.
Check to see if it is Polished and Slightly rounded at the point of engagement.
If ANY ROUNDING is visible under high magnification, Cease use immediately and have this looked into by an expert LUGER REPAIRMAN Several available here on the forum.
Weak sear spring another possibility.
Either can allow the breech to close with the firing pin extended into firing position and could cause erratic full auto firing.
DO NOT FIRE UNTIL CORRECTED!!!!!!!!!
I recommend "Hugh, Thor, Tom H.
ViggoG

11-26-2005, 11:47 PM	#2
ViggoG RIP Join Date: Jun 2002 Location: South Side Virginia Posts: 534 Thanks: 0 Thanked 1 Time in 1 Post	Sounds to me like a worn sear / Firing pin engagement. Check to see if it is Polished and Slightly rounded at the point of engagement. If ANY ROUNDING is visible under high magnification, Cease use immediately and have this looked into by an expert LUGER REPAIRMAN Several available here on the forum. Weak sear spring another possibility. Either can allow the breech to close with the firing pin extended into firing position and could cause erratic full auto firing. DO NOT FIRE UNTIL CORRECTED!!!!!!!!! I recommend "Hugh, Thor, Tom H. ViggoG