SOG & Broken Ejector

Herb · 03-26-2005, 04:14 PM

Dude, the only way to get the spring out is to remove the pin and bottom piece. If you do this carefully, supporting the mag on a flat surface such as a 2/4 with a hole drilled in, or thru, it to let the pin drop out, with the mag base just over the edge, and use a punch of the proper size you should have no problem. I've done it this way and there is no way to tell the pin was ever removed but you have to use care in doing it.

03-26-2005, 04:14 PM	#3
Herb User Join Date: Jun 2002 Location: Utah, in the land of the Sleeping Rainbow Posts: 1,457 Thanks: 0 Thanked 1 Time in 1 Post	Dude, the only way to get the spring out is to remove the pin and bottom piece. If you do this carefully, supporting the mag on a flat surface such as a 2/4 with a hole drilled in, or thru, it to let the pin drop out, with the mag base just over the edge, and use a punch of the proper size you should have no problem. I've done it this way and there is no way to tell the pin was ever removed but you have to use care in doing it. __________________ Utah, where gun control means a steady trigger pull