magasine spring

Steinar · 10-05-2004, 06:53 AM

Just wondering.. does the magasine spring get weak if it's stored with 8 rounds over long period of time?

G.T. · 10-05-2004, 10:33 AM

Hi Morgan! I'm pretty sure it's not too bad for the spring, but it certainly puts a lot of pressure on the mag. seams and feed lip.... I have found that the spring degrades pretty rapidly with repeated, full relaxed to full compression, solid, cycles! After market springs are far worse then originals.. if you find a very large wire dia. heavy mag. spring...like in the post war Mauser mag's of the 70's.. then they have tried to overcome this issue with bulk rather then quality of material.... Best to you Morgan! Til...lat'r....GT

Don M · 10-05-2004, 09:28 PM

For what it's worth, I just inherited a rig with a magazine having 7 rounds in it for about 50 years. It seems OK.

Don

Lugerdoc · 10-06-2004, 08:30 AM

The real enemies of spring tentsion are temperature changes and moisture. A loaded mag will weaken a lot faster is left outside in the vehicle, than if kept in the house. TH

Steinar · 10-06-2004, 08:50 AM

Thanks for another good Luger information!

Stevie · 10-10-2004, 03:27 PM

I've had problems with (cheap) aftermarket High-Power mag springs taking a set after being left loaded several months. Installed new Wolff springs and fixed that.

Stevie.

10-05-2004, 06:53 AM	#1
Steinar User Join Date: May 2004 Posts: 1,538 Thanks: 18 Thanked 36 Times in 21 Posts	magasine spring Just wondering.. does the magasine spring get weak if it's stored with 8 rounds over long period of time? __________________ Previously known as Morgan Kane

10-05-2004, 09:28 PM	#3
Don M Patron LugerForum Patron Join Date: Aug 2004 Location: Houston, TX Posts: 1,429 Thanks: 67 Thanked 292 Times in 191 Posts	For what it's worth, I just inherited a rig with a magazine having 7 rounds in it for about 50 years. It seems OK. Don __________________ Regards, Don donmaus1@aol.com Author of History Writ in Steel: German Police Markings 1900-1936 http://www.historywritinsteel.com

10-06-2004, 08:30 AM	#4
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	The real enemies of spring tentsion are temperature changes and moisture. A loaded mag will weaken a lot faster is left outside in the vehicle, than if kept in the house. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

10-06-2004, 08:50 AM	#5
Steinar User Join Date: May 2004 Posts: 1,538 Thanks: 18 Thanked 36 Times in 21 Posts	Thanks for another good Luger information! __________________ Previously known as Morgan Kane

10-05-2004, 10:33 AM	#2
G.T. Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: Chandler Arizona Posts: 3,528 Thanks: 1,334 Thanked 3,711 Times in 1,014 Posts	Hi Morgan! I'm pretty sure it's not too bad for the spring, but it certainly puts a lot of pressure on the mag. seams and feed lip.... I have found that the spring degrades pretty rapidly with repeated, full relaxed to full compression, solid, cycles! After market springs are far worse then originals.. if you find a very large wire dia. heavy mag. spring...like in the post war Mauser mag's of the 70's.. then they have tried to overcome this issue with bulk rather then quality of material.... Best to you Morgan! Til...lat'r....GT

10-10-2004, 03:27 PM	#6
Stevie User Join Date: Aug 2002 Location: Ok. Posts: 212 Thanks: 0 Thanked 0 Times in 0 Posts	I've had problems with (cheap) aftermarket High-Power mag springs taking a set after being left loaded several months. Installed new Wolff springs and fixed that. Stevie.