New member with a problem

ViggoG · 03-02-2004, 10:12 PM

Morgan,
Remove your Cannon Assembly
Remove the Spring Guide, Spring, And Firing Pin.
Examine the Rear of the Bolt Assembly. for any damage, or Foreign Material or Damage that may keep the guide Pin from rotating to the position where the "Slot is Vertical". This is most Important as, "IF THE SLOT IN THE SPRING GUIDE IS NOT VERTICAL" The lug of the pin will not seat in the lug recess, holding the pin forward about 1 mm and "THE MALFUNCTION THAT YOU DESCRIBE WILL HAPPEN EVERY TIME !!!!" I tested it on my "06 AE".
ViggoG

03-02-2004, 10:12 PM	#2
ViggoG RIP Join Date: Jun 2002 Location: South Side Virginia Posts: 534 Thanks: 0 Thanked 1 Time in 1 Post	Morgan, Remove your Cannon Assembly Remove the Spring Guide, Spring, And Firing Pin. Examine the Rear of the Bolt Assembly. for any damage, or Foreign Material or Damage that may keep the guide Pin from rotating to the position where the "Slot is Vertical". This is most Important as, "IF THE SLOT IN THE SPRING GUIDE IS NOT VERTICAL" The lug of the pin will not seat in the lug recess, holding the pin forward about 1 mm and "THE MALFUNCTION THAT YOU DESCRIBE WILL HAPPEN EVERY TIME !!!!" I tested it on my "06 AE". ViggoG