Luger ID

Ted G · 12-30-2002, 01:28 AM

Ed thanks for the quick reply. Must be an owl??
The 619b is actually on the front of the frame not the barrel. Also the b is under the 619 as the frame curves from vert. to horz. Yes the sn on the barrel is confusing especially the way the 5742 is stamped on top and perpindicular to the 619 between the 6 and 1. (it is hard to tell but it could be an S742) It is also impossible to tell which one was stamped first but at closer examination it looks like the 619 was stamped after the 5742. I do have a new dig camera and will try to take and post some showing the markings. Also not mentioned earlier, both the extractor and safety are in German. No grip safety and there is a stock lug. Thanks again Ted.

12-30-2002, 01:28 AM	#3
Ted G User Join Date: Dec 2002 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts	Ed thanks for the quick reply. Must be an owl?? The 619b is actually on the front of the frame not the barrel. Also the b is under the 619 as the frame curves from vert. to horz. Yes the sn on the barrel is confusing especially the way the 5742 is stamped on top and perpindicular to the 619 between the 6 and 1. (it is hard to tell but it could be an S742) It is also impossible to tell which one was stamped first but at closer examination it looks like the 619 was stamped after the 5742. I do have a new dig camera and will try to take and post some showing the markings. Also not mentioned earlier, both the extractor and safety are in German. No grip safety and there is a stock lug. Thanks again Ted.