Baby Luger

Thor · 07-26-2004, 07:12 PM

Hub wrote this for the description of how it is done. First the frame is cut into two pieces and approximately one half inch is removed from the lower portion of the grip. The cutting is done in a wire EDM to assure straight clean cuts. The frame parts are then joined together and TIG welded with a copper mandrel holding the two pieces on the inside. The copper mandrel also helps control the welding heat by acting as a heat-sink. When welding the tool steel which firearms are made from, the metal has to be protected from excessive heat, or hard spots will develop showing up as the dreaded plum-color when blued.

07-26-2004, 07:12 PM	#16
Thor User Join Date: Jun 2002 Location: Rio Rancho, New Mexico Posts: 4,583 Thanks: 958 Thanked 971 Times in 277 Posts	Hub wrote this for the description of how it is done. First the frame is cut into two pieces and approximately one half inch is removed from the lower portion of the grip. The cutting is done in a wire EDM to assure straight clean cuts. The frame parts are then joined together and TIG welded with a copper mandrel holding the two pieces on the inside. The copper mandrel also helps control the welding heat by acting as a heat-sink. When welding the tool steel which firearms are made from, the metal has to be protected from excessive heat, or hard spots will develop showing up as the dreaded plum-color when blued. __________________ Thor's Luger Clinic http://members.rennlist.com/lugerman/ Ted Green (Thor Yaller Boots) 725 Western Hills Dr SE, Rio Rancho, NM 87124 915-526-8925 Email thor340@aol.com ----------------------------------- John3:3 Jesus answered and said to him, "Most assuredly, I say to you, unless one is born again, he cannot see the kingdom of God."