Takedown lever moving

John Sabato · 11-03-2003, 10:35 AM

riffraff,

creating a 'pocket' for the spring loaded ball is the answer to your problem... unless the spring behind the ball is damaged or otherwise too weak to hold the lever in place...

grinding anything on your gun will void the warranty... DON'T do this if your warranty is a concern... send it to Orimar for repair instead...but if you have confidence in your ablility to create this pocket, and your gun is out of warranty...you should be able to solve your problem in about 60 seconds with your Dremel and the right shaped tool...

11-03-2003, 10:35 AM	#8
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,156 Thanks: 3,003 Thanked 2,309 Times in 1,098 Posts	riffraff, creating a 'pocket' for the spring loaded ball is the answer to your problem... unless the spring behind the ball is damaged or otherwise too weak to hold the lever in place... grinding anything on your gun will void the warranty... DON'T do this if your warranty is a concern... send it to Orimar for repair instead...but if you have confidence in your ablility to create this pocket, and your gun is out of warranty...you should be able to solve your problem in about 60 seconds with your Dremel and the right shaped tool... __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*