Questions regarding my Interarms Luger--9mm

Edward Tinker · 09-19-2003, 07:50 PM

<blockquote>quote:<hr />Originally posted by mauro:
the production date is stamped on the frame left side. Usually close to the Ulm acceptance mark there are two digit or two letter. If you have two digits, they represents the last two digits of the year, for example (73 for 1973). At a certain point of the production, Mauser started to use two characters instead of digits. In this case you have to apply the following rule: A=0, B=1, C=2 .. For example HI, it means 78.
<hr /></blockquote>Does yours have this same numbering on yours?

Ed

09-19-2003, 07:50 PM	#10
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,974 Thanks: 2,072 Thanked 4,609 Times in 2,123 Posts	</font><blockquote><font size="1" face="Verdana,Tahoma,Arial,Helvetica,Geneva">quote:</font><hr /><font size="2" face="Verdana,Tahoma,Arial,Helvetica,Geneva">Originally posted by mauro: <strong>the production date is stamped on the frame left side. Usually close to the Ulm acceptance mark there are two digit or two letter. If you have two digits, they represents the last two digits of the year, for example (73 for 1973). At a certain point of the production, Mauser started to use two characters instead of digits. In this case you have to apply the following rule: A=0, B=1, C=2 .. For example HI, it means 78. </strong></font><hr /></blockquote><font size="2" face="Verdana,Tahoma,Arial,Helvetica,Geneva">Does yours have this same numbering on yours? Ed __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV