New Replacement Luger Barrels

PACKET · 05-20-2003, 08:42 PM

I recently rebarreled a Luger with a 6" from Numrich. I had to trim the shoulder just a bit to line up the sight. I dont know if they are all this way, but mine seemed to be short chambered, a good thing. I was able to finish ream the chamber and get a perfect headspace. The fitting process does take extreme care and patience, but I did not find it difficult. I have not had time to take it to the range yet, so I dont know how accurate it will be. Probably better than I can shoot.

05-20-2003, 08:42 PM	#5
PACKET User Join Date: Apr 2003 Location: FL. Posts: 68 Thanks: 0 Thanked 0 Times in 0 Posts	I recently rebarreled a Luger with a 6" from Numrich. I had to trim the shoulder just a bit to line up the sight. I dont know if they are all this way, but mine seemed to be short chambered, a good thing. I was able to finish ream the chamber and get a perfect headspace. The fitting process does take extreme care and patience, but I did not find it difficult. I have not had time to take it to the range yet, so I dont know how accurate it will be. Probably better than I can shoot.