Another One II and a Question

John Sabato · 01-07-2003, 11:10 AM

Al,

While the trigger return spring on this particular gun may be lighter than the others you have tried, mechanically, it is an absolute necessity for the trigger to be released at least far enough for the disconnector to properly function so the sear will be engaged so you can fire the next shot. This is true of all semiautos...including all those you listed. If this were not the case, then the pistol would not be a semi-automatic, but a full automatic, firing until the trigger were released.

Perhaps your disconnector plunger on the sear bar needs a thorough cleaning and lubrication?

01-07-2003, 11:10 AM	#2
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,156 Thanks: 3,003 Thanked 2,308 Times in 1,098 Posts	Al, While the trigger return spring on this particular gun may be lighter than the others you have tried, mechanically, it is an absolute necessity for the trigger to be released at least far enough for the disconnector to properly function so the sear will be engaged so you can fire the next shot. This is true of all semiautos...including all those you listed. If this were not the case, then the pistol would not be a semi-automatic, but a full automatic, firing until the trigger were released. Perhaps your disconnector plunger on the sear bar needs a thorough cleaning and lubrication? __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*