7.65mm to 9mm conversion

Lugerdoc · 05-24-2003, 10:00 AM

Crown Vic 96, (I once owned a Crown Victoria '55) Your pictured luger is a 1970s era Swiss style Parabellum. Unfortunately, no one in this country is making the correct conversion barrels for these and standard PO8 barrels are 1/8" too short in the threaded area. I bought all of Interarms remaining parts for these when they folded, but am out of barrels. You could install a complete PO8 upper (Barrelled receiver) on your frame, and it would probably function OK, but the receiver in battery would be an 1/8" short of lining up with the front of the frame. I'm currently trying to get some long receiver 9mm barrels out of Europe, but there are both import & export restrictions. TH

05-24-2003, 10:00 AM	#19
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	Crown Vic 96, (I once owned a Crown Victoria '55) Your pictured luger is a 1970s era Swiss style Parabellum. Unfortunately, no one in this country is making the correct conversion barrels for these and standard PO8 barrels are 1/8" too short in the threaded area. I bought all of Interarms remaining parts for these when they folded, but am out of barrels. You could install a complete PO8 upper (Barrelled receiver) on your frame, and it would probably function OK, but the receiver in battery would be an 1/8" short of lining up with the front of the frame. I'm currently trying to get some long receiver 9mm barrels out of Europe, but there are both import & export restrictions. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net