Artillery Luger Problem

Thor · 05-20-2004, 11:44 AM

This problem was the reason that Mauser in 1934 went to a hump back frame, a frame extension at the rear to better contain the pin, and the NAVY models went to a enlarged head on the axle pin. Also Stoeger (modern AIMCO, MITCHELL, etc) use a larger pin. The first thing to check is does the pin have it full "ridge" I have seen some that have had the ridge removed for what ever reason. If you have a messed up pin, all you need probably is a new pin with the correct head on it. If that is not the case, I would think it is mismatch and a worn frame/reciever stop. Check the pin head first and let us know! Thanks

05-20-2004, 11:44 AM	#2
Thor User Join Date: Jun 2002 Location: Rio Rancho, New Mexico Posts: 4,583 Thanks: 958 Thanked 971 Times in 277 Posts	This problem was the reason that Mauser in 1934 went to a hump back frame, a frame extension at the rear to better contain the pin, and the NAVY models went to a enlarged head on the axle pin. Also Stoeger (modern AIMCO, MITCHELL, etc) use a larger pin. The first thing to check is does the pin have it full "ridge" I have seen some that have had the ridge removed for what ever reason. If you have a messed up pin, all you need probably is a new pin with the correct head on it. If that is not the case, I would think it is mismatch and a worn frame/reciever stop. Check the pin head first and let us know! Thanks __________________ Thor's Luger Clinic http://members.rennlist.com/lugerman/ Ted Green (Thor Yaller Boots) 725 Western Hills Dr SE, Rio Rancho, NM 87124 915-526-8925 Email thor340@aol.com ----------------------------------- John3:3 Jesus answered and said to him, "Most assuredly, I say to you, unless one is born again, he cannot see the kingdom of God."