100 years ago today- end of WW1! shot my first P08 after 2 years

[kurusu]

Originally Posted by RShaw

If one "missed" ejection. Have a good look at the ejector before putting it away (that's a major sin to me, as you surely know by now ). I only start having "failures to eject" shortly before the ejector breaks.

Thank you Kurusu... I'm not sure what would indicate an "about-to-break-ejector" , but I will have a look. Perhaps also a dull extractor tip which actually catches the rim of the spent case when ejecting? or a spent case itself whose rim is a fraction of a mm too narrow? Doesn't take much.... Your opinion?

The ejector is basically a spring with inwards tension. Make sure, when you open the action, that the ejector seats fully into the bolt slot and inwards of the barrel extension (receiver). If it doesn't. Consider a new ejector.

Images of closed bolt, the bolt pushes the forward tip of the ejector flush with the barrel extension.
20180529_015557.jpg
20180529_020010.jpg

Images with open action, the slot cut in the right bolt face, allows the forward tip of the ejector to bend inwards.
20180529_015735.jpg
20180529_015853.jpg

What breaks in the ejector is the foward tip when the "springness" is lost. The tell tale sign, besides starting to fail to eject, is the forward tip not bending inwards when the action is open.

I hope I my explanation is clear.