Round not consistently extracting

[mestguy182]

Originally Posted by DonVoigt

Yes,
when fired the case expands slightly.
You can also look at a fired case for signs of scoring, marks, or bulging that could make extraction more difficult.

Extraction by hand occurs much more slowly than when firing.

I'd bet though, that your problem is with the hook of the extractor, or some junk/gunk keeping it from coming down fully.

It could even be the extractor notch i the barrel is not cut correctly and interfering.

Pictures of the breech, and the extractor from the side and bottom would help.

Couple of quick photos.