Round not consistently extracting

4 Scale · 10-08-2018, 09:24 PM

One test I would perform on this pistol if it were mine: I'd remove the extractor, and carefully place a round in the chamber and fire the pistol. I would then see how difficult it is to remove the spent case by hand. Probably would do it few times. I'd bring a dowel with me to the range in case I needed extra push to remove the case.

I'd also try both the extractor and ejector in a different pistol known to function well to verify they are operating correctly.

My experience is 75% of fixing Luger issues is to properly diagnose.

10-08-2018, 09:24 PM	#16
4 Scale User Join Date: Nov 2014 Posts: 544 Thanks: 194 Thanked 490 Times in 251 Posts	One test I would perform on this pistol if it were mine: I'd remove the extractor, and carefully place a round in the chamber and fire the pistol. I would then see how difficult it is to remove the spent case by hand. Probably would do it few times. I'd bring a dowel with me to the range in case I needed extra push to remove the case. I'd also try both the extractor and ejector in a different pistol known to function well to verify they are operating correctly. My experience is 75% of fixing Luger issues is to properly diagnose.