Round not consistently extracting

mestguy182 · 10-08-2018, 01:59 PM

So, just got back from the range and all is not well. The gun performed much worse this time than last time. To start with, as mentioned above, all that changed since my last trip was the ejector was filed down so that it didn't drag against the frame. My very first shot the spent case failed to extract out of the barrel, so I stripped the gun and replaced the Wolff extractor spring with the one that came with the gun, on inspection their heights were identical but the original spring has a noticeably larger diameter.

This trip I couldn't get more than one round to extract correctly, meaning sometimes I could fire 2 consecutive rounds with out issue but no more and most of the time it failed to extract after only one round. Still every time I cycled the toggle by hand the spent case extracted successfully, sort of at a loss about what to try next. Both the bore and extractor look ok to me but I'll try to get some pictures.

10-08-2018, 01:59 PM	#11
mestguy182 User Join Date: Sep 2018 Location: Indialantic, FL Posts: 26 Thanks: 15 Thanked 2 Times in 1 Post	So, just got back from the range and all is not well. The gun performed much worse this time than last time. To start with, as mentioned above, all that changed since my last trip was the ejector was filed down so that it didn't drag against the frame. My very first shot the spent case failed to extract out of the barrel, so I stripped the gun and replaced the Wolff extractor spring with the one that came with the gun, on inspection their heights were identical but the original spring has a noticeably larger diameter. This trip I couldn't get more than one round to extract correctly, meaning sometimes I could fire 2 consecutive rounds with out issue but no more and most of the time it failed to extract after only one round. Still every time I cycled the toggle by hand the spent case extracted successfully, sort of at a loss about what to try next. Both the bore and extractor look ok to me but I'll try to get some pictures.