Not extracting

DavidJayUden · 08-11-2018, 05:48 PM

I'm confused if your problem is extraction or ejection. If the brass is stuck in the chamber because the extractor let go of it (slipped off the rim) that is one thing, if it is simply not being thrown clear of the gun before the toggle starts forward, that is another.
You should be able to cycle it by hand to see if it is pulling it out of the chamber, but of course if a porrus chamber is the issue non-firing will not show the problem.
Clarify the problem for me please.
dju

08-11-2018, 05:48 PM	#11
DavidJayUden Patron LugerForum Patron Join Date: Nov 2008 Posts: 4,047 Thanks: 578 Thanked 1,414 Times in 887 Posts	I'm confused if your problem is extraction or ejection. If the brass is stuck in the chamber because the extractor let go of it (slipped off the rim) that is one thing, if it is simply not being thrown clear of the gun before the toggle starts forward, that is another. You should be able to cycle it by hand to see if it is pulling it out of the chamber, but of course if a porrus chamber is the issue non-firing will not show the problem. Clarify the problem for me please. dju