S/42 luger family heirloom

[ithacaartist]

Originally Posted by Cabledog

Never even noticed! Does it insert into the right side of the frame on the other side of the locking lever?

No, you must first remove the lever. The spring will lie in a channel for it on the bottom of the boring for the lever. Put an empty mag into the gun and pull back the action to lock it open. The lever will rotate at this point. If the spring is missing entirely, the lever should just about fall out. If a functional spring is there, the lever won't come out unless you take it out. Once the lever is removed, you'll see the spring or its remnants, or no spring. It may simply have a short "leg" which isn't readily visible in the tiny hole from the outside. In this case, The lever will rotate from locked to unlocked and back without a tendency to fall out. But if it is missing after all, or in pieces, score one from lugerdoc. And, of course, check the FAQ for guidance in installing the replacement. It's not difficult, but there are tips to make it less tricky in the discussions about the process. When you're done, you'll say, "Piece of cake."

[Cabledog]

Originally Posted by ithacaartist

No, you must first remove the lever. The spring will lie in a channel for it on the bottom of the boring for the lever. Put an empty mag into the gun and pull back the action to lock it open. The lever will rotate at this point. If the spring is missing entirely, the lever should just about fall out. If a functional spring is there, the lever won't come out unless you take it out. Once the lever is removed, you'll see the spring or its remnants, or no spring. It may simply have a short "leg" which isn't readily visible in the tiny hole from the outside. In this case, The lever will rotate from locked to unlocked and back without a tendency to fall out. But if it is missing after all, or in pieces, score one from lugerdoc. And, of course, check the FAQ for guidance in installing the replacement. It's not difficult, but there are tips to make it less tricky in the discussions about the process. When you're done, you'll say, "Piece of cake."

Noted. Thank you! I ordered a triple k replacement mag for now. I'll have to wait until it gets here before I can do a takedown

[sheepherder]

Originally Posted by Cabledog

Noted. Thank you! I ordered a triple k replacement mag for now. I'll have to wait until it gets here before I can do a takedown

The Triple-K mag is probably a mistake, unless you use it just for display. Mec-Gar makes the best Luger replacement magazines; Greg Cote has them in stock. GT here on the forum can dress it up for you, and even make improvements, if desired.

[Cabledog]

Originally Posted by sheepherder

The Triple-K mag is probably a mistake, unless you use it just for display. Mec-Gar makes the best Luger replacement magazines; Greg Cote has them in stock. GT here on the forum can dress it up for you, and even make improvements, if desired.

I should say I THINK it's a triple K. It actually doesn't specify on the site. I had triple k on the brain cause i was looking for Magazine for the enfield. I attached the photo they have on the site.