Baby Luger Breech Block Slap

DonVoigt · 01-30-2018, 04:59 PM

Seriously,
it is not an "issue"!

It is clear, at least to me, that most of the "stopping" or contact is occurring at the toggle/rear frame outside interface.

There are at least three areas that could "touch", the outside rear frame, the inside area shown in the first picture, and the round circle most often seen where the firing pin guide contacts the rear.

Remove the contact at one point, and it will likely move to the next. JMHO.

01-30-2018, 04:59 PM	#15
DonVoigt User Join Date: Apr 2015 Location: near Charlotte NC Posts: 4,681 Thanks: 1,443 Thanked 4,355 Times in 2,041 Posts	Seriously, it is not an "issue"! It is clear, at least to me, that most of the "stopping" or contact is occurring at the toggle/rear frame outside interface. There are at least three areas that could "touch", the outside rear frame, the inside area shown in the first picture, and the round circle most often seen where the firing pin guide contacts the rear. Remove the contact at one point, and it will likely move to the next. JMHO. __________________ 03man(Don Voigt); Luger student and collector. Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie