Gun Shop Inspection Etiquette...

Major Tom · 01-13-2018, 09:36 AM

Surprising number of left side grip panels have that 'chip' broken off by the safety lever. My advice is to remove the grip screw and slide the grip panel down while holding it to the frame. At the top of panel is a small 'ledge' that can crack off very easily. If the panel will not slide down easily, tap it lightly from the outside, not from opposite inner side. Old oil/rust may be holding the panel.

01-13-2018, 09:36 AM	#11
Major Tom User Join Date: Jan 2017 Location: S.E. Iowa Posts: 484 Thanks: 533 Thanked 228 Times in 125 Posts	Surprising number of left side grip panels have that 'chip' broken off by the safety lever. My advice is to remove the grip screw and slide the grip panel down while holding it to the frame. At the top of panel is a small 'ledge' that can crack off very easily. If the panel will not slide down easily, tap it lightly from the outside, not from opposite inner side. Old oil/rust may be holding the panel. __________________ I Build Custom Pistol Boxes