trigger sticks

thater · 11-07-2002, 08:49 PM

I fixed it. I found that the pin on the end of the sear bar was frozen into place. I removed the sear bar and soaked it in penetrating solution. I viced it up in a brass vice and tapped on the pin with a brass hammer. I got it to work in and out. After pushing it in and letting it out about a hundred times, I oiled it up and reinstalled it. It seem to operate properly now. I havent shot it yet, I will tomarrow. Thanks John and Viggo. I couldnt have fixed it without you. Ben Thate

11-07-2002, 08:49 PM	#1
thater User Join Date: Oct 2002 Posts: 13 Thanks: 0 Thanked 0 Times in 0 Posts	I fixed it. I found that the pin on the end of the sear bar was frozen into place. I removed the sear bar and soaked it in penetrating solution. I viced it up in a brass vice and tapped on the pin with a brass hammer. I got it to work in and out. After pushing it in and letting it out about a hundred times, I oiled it up and reinstalled it. It seem to operate properly now. I havent shot it yet, I will tomarrow. Thanks John and Viggo. I couldnt have fixed it without you. Ben Thate