Breechblock pin

4 Scale · 04-16-2017, 08:29 PM

If it were mine I would do a 100% detailed strip of the toggle to make sure no other surprises. I'd suggest contact LugerDoc (Tom Heller) for a replacement pin.

Once removed and inspected, if all other components are OK I cannot see why any would need to be replaced.

I replace or modify springs only when there is an issue indicating a need. The Luger is a balanced system and I would think spring replacement on a perfectly functioning pistol could possibly require further work to achieve proper operation.

04-16-2017, 08:29 PM	#2
4 Scale User Join Date: Nov 2014 Posts: 544 Thanks: 194 Thanked 490 Times in 251 Posts	If it were mine I would do a 100% detailed strip of the toggle to make sure no other surprises. I'd suggest contact LugerDoc (Tom Heller) for a replacement pin. Once removed and inspected, if all other components are OK I cannot see why any would need to be replaced. I replace or modify springs only when there is an issue indicating a need. The Luger is a balanced system and I would think spring replacement on a perfectly functioning pistol could possibly require further work to achieve proper operation.