my profile |
register |
faq |
search upload photo | donate | calendar |
11-28-2016, 11:12 PM | #1 |
User
Join Date: Apr 2015
Location: near Charlotte NC
Posts: 4,678
Thanks: 1,441
Thanked 4,348 Times in 2,038 Posts
|
A lesson in fakery or almost "took" by a good mechanic
I saw this nice looking, but re-finished, Erfurt Artillery for sale last week. It really peaked my interest, as it is a 1914 with 1920 property stamp And a police sear safety and police markings.
I am partial to artillery lugers and police lugers, so I had to have it. Fast forward a week, it arrived today. Gave it a quick look in the shop when I picked it up, I new it had a couple "anomalies" from the sales pictures, so home it came for a closer inspection. Quick exam showed the expected restored finish and replace grips- both of which were visible in the pictures on line. But a couple or three things nagged- why would a pistol with bright shiney bore and no external pitting need a re-finish, and why did a police pistol, which should have a 1 or 2 numbered mag by the time it got a sear safety, still have a like new double Erfurt inspection matching magazine with a DWM body. Well the answer is that the entire barrel is new, with fake markings and numbers, the frame is partially renumbered, and the magazine is a total fabrication. So how do we know this? Fortunately all we have to do on these forums is ask for help and opinions. It also helps to have a genuine 1914 Erfurt for direct comparison- which I do. Long story a little shorter, there are "tells" that anyone can observe if one knows what to look for. The added numbers are pantographed, not struck with a stamp or die- pantographing leaves tell-tale rounded ends and markings from the swirling of the tool in the numbers or letters, also there is no displaced metal as is seen in a stamp. You can see the pantographed numbers in the pictures below- on the magazine, barrel, the 3 and 9 on the frame are enhanced. All the barrel numbers and the suffix are pantographed! Compare the difference between the "7s" on the frame and the barrel; on the frame they have square ends, elsewhere they are rounded. The expected harp/square ends are clearly visible for comparison on the chamber numbers, the others should be similar- just smaller. Notice how the inspection marking on the take down lever is faint, compared with the strong "77" and the really sharp RC and C/x marking on the barrel in close proximity. The magazine is tougher to see in the grooves, but the rounded ends are there, and there is no displaced wood. Also the numbers and inspections on the rear sight are not in the right places, nor are they stamped. The sight elevator clearly shows the panto-graphed numbers on the right or lower pistol vs. the fine stamped markings of the genuine 1914. Also the inspection stamps are not as small on the fake, and too "sharp". The front sight fine tune screw, slot, and blade are a sloppy fit on the fake, compare them with the fine work and fitting of the genuine barrel which is on top/left. Even the adjustment holes are off center in the fake. The markings on the top of the front sight are also missing on the fake, I guess they are too small to do with the tools at hand. And the guy was too lazy or in too big a hurry to polish off the blue under the slider, notice the dark spot with the slider pushed up! If that is not enough, the mirror bore- with non standard rifling- is a clue, and most telling is that the obduration ring in the chamber is missing, it would be present in an original 1914 barrel. This work is scary good, from 3 feet or in online pictures. While this work may have started out as a true and known to the owner restoration- the work was not cheap- by the time it passed to a second owner or a dealer and to me it is just a fake and an example of what we as collectors have to be on the lookout for. Lucky for me I bought it from a dealer that stands behind his goods, so it is on the way back for a full refund. I hesitated before posting these comparisons, lest they "instruct" the fakers; but decided the education was worth the chance that it might help them improve. Basically it is too much trouble, and too expensive in time and tools to do a "perfect" fake job; thank goodness that fakers are lazy. JMHO.
__________________
03man(Don Voigt); Luger student and collector. Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie |
The following 17 members says Thank You to DonVoigt for your post: | Arizona Slim, cirelaw, Douglas Jr., hayhugh, ithacaartist, JD, John Sabato, kurusu, laoshi75, lfid, Mac Cat, OIF2, Olle, pitsword, SIGP2101, spangy, Zorba |
11-29-2016, 01:38 AM | #2 |
User
Join Date: Apr 2016
Location: Newburgh,IN
Posts: 770
Thanks: 373
Thanked 605 Times in 321 Posts
|
Crafty sleuthing! Sherlock Holmes would be impressed...assuming he knew anything about Lugers.
Nice, edifying story, Don, thanks for sharing.
__________________
“God created war so that Americans would learn geography.” ― Mark Twain |
11-29-2016, 08:00 AM | #3 | |
User
Join Date: Feb 2010
Location: Tennessee
Posts: 1,149
Thanks: 159
Thanked 663 Times in 318 Posts
|
Quote:
I really don't think you're helping the fakers by posting this, when they're working at this level they already know. You would have to use period correct stamps (right size, font, shape etc) to re-create the markings, and you would also have to strike them in the same way as they did at the factory (straight, nicely lined up, spaced correctly, same depth etc). For a perfect, undetectable job you would have so much time and money in stamps, jigs and labor that it's just not worth it. Pantographed markings have a very distinct appearance, and they're a dead giveaway on most guns. |
|
The following 5 members says Thank You to Olle for your post: |
11-29-2016, 08:48 AM | #4 |
Lifer
Lifetime Forum Patron Join Date: Apr 2015
Location: Austin, Texas
Posts: 678
Thanks: 2,027
Thanked 552 Times in 296 Posts
|
Thanks Don!
There is nothing better than side by side examples and we are hear to learn, too! |
The following member says Thank You to Mac Cat for your post: |
11-29-2016, 10:52 AM | #5 |
Patron
LugerForum Patron Join Date: Nov 2008
Posts: 4,047
Thanks: 578
Thanked 1,414 Times in 887 Posts
|
Refinished for sure, but I'm just not seeing the red flags on all the rest.
I'm sure you are right, but my eye is just not so critical. dju |
11-29-2016, 02:26 PM | #6 |
Super Moderator
Eternal Lifer LugerForum Patron Join Date: Jun 2002
Location: North of Spokane, WA
Posts: 15,916
Thanks: 1,995
Thanked 4,507 Times in 2,081 Posts
|
David, I have the same issues, and will usually catch something wrong much later.
The pantographing is fairly obvious, especially if blown up. It is a 'worry' when you knowingly have something made 'unusual' and 20 year pass... The problem with practically all the dealers that I know is that they take consignments. And until the piece comes to them, they go by what they are told. Being sold as refinished was likely their thought that it would be bought as a pretty shooter and be done with it. But it depends on the cost. Was the police sear added recently or is it one of the rarer artillerys out there? Probably added the same time as the rest of it being 'restored'... |
11-29-2016, 03:42 PM | #7 |
Lifer
Lifetime Forum Patron Join Date: Jul 2002
Location: VA
Posts: 3,592
Thanks: 1,773
Thanked 2,527 Times in 786 Posts
|
It almost certainly a boosted double date 1914 Erfurt P08 Police Luger.
|
11-29-2016, 03:57 PM | #8 |
User
Join Date: Apr 2015
Location: near Charlotte NC
Posts: 4,678
Thanks: 1,441
Thanked 4,348 Times in 2,038 Posts
|
Ed,
the sear safety was re-finished along with the rest of the piece. No way to know for sure, but I believe the pistol was a 4" P08 - altered by notching the chamber and adding a totally new artillery barrel. You know I "really, really" wanted it to be a genuine police artillery; if there was even a 5% chance- I would have kept it. However- If anyone can supply me with the original artillery barrel numbered to the piece, I'll humbly and excitedly change my mind! But it is not an artillery, as George said it is - a boosted" double date" Erfurt police P 08.
__________________
03man(Don Voigt); Luger student and collector. Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie |
11-30-2016, 12:07 AM | #9 |
Lifer - Twice Over
Lifetime Forum Patron Join Date: Jun 2002
Location: Savannah
Posts: 515
Thanks: 0
Thanked 253 Times in 112 Posts
|
I would add that the serial number postscript "b" on the barrel does not match the "b" on the receiver.
KFS |
11-30-2016, 07:43 AM | #10 |
Patron
LugerForum Patron Join Date: Nov 2008
Posts: 4,047
Thanks: 578
Thanked 1,414 Times in 887 Posts
|
But the notch on the chamber for the artillery sight would have been there regardless on an Erfurt, no?
dju |
The following member says Thank You to DavidJayUden for your post: |
11-30-2016, 09:13 AM | #11 |
User
Join Date: Apr 2015
Location: near Charlotte NC
Posts: 4,678
Thanks: 1,441
Thanked 4,348 Times in 2,038 Posts
|
David,
Not in 1914, but after 1916 most Erfurts did have the cut. There are signs in the cut, lines and shape, that it is not original either.
__________________
03man(Don Voigt); Luger student and collector. Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie |
The following 2 members says Thank You to DonVoigt for your post: |
11-30-2016, 09:16 AM | #12 | |
Lifer
Lifetime Forum Patron Join Date: Feb 2009
Location: ...on the 'ol Erie Canal...
Posts: 8,182
Thanks: 1,398
Thanked 4,440 Times in 2,328 Posts
|
Quote:
I had occasion to visit a GM store in a nearby city and I had to talk a clerk [middle-aged, not a kid] through the differences between 22LR, 22Short; target and hi-velocity, before he could even look for the cartridges I wanted (22's are not stocked on the floor). And this was before they hired the holiday drones. While there I looked at the used handguns and was surprised to see they still had Walther P1's at $499. That has got to be the best deal going.
__________________
I like my coffee the way I like my women... ...Cold and bitter... |
|
11-30-2016, 12:54 PM | #13 | |
User
Join Date: Feb 2010
Location: Tennessee
Posts: 1,149
Thanks: 159
Thanked 663 Times in 318 Posts
|
Quote:
|
|
12-20-2016, 02:35 PM | #14 |
Patron
LugerForum Patron Join Date: Aug 2004
Location: Houston, TX
Posts: 1,429
Thanks: 67
Thanked 292 Times in 191 Posts
|
Don, I'm sorry I came to this party so late. Congratulations on great detective work. As I mentioned in my email to you, the existence of a Saxon police LP08 had me puzzled but I didn't examine the details. I agree that it served the Saxon police as a 4" P08.
__________________
Regards, Don donmaus1@aol.com Author of History Writ in Steel: German Police Markings 1900-1936 http://www.historywritinsteel.com |
The following member says Thank You to Don M for your post: |
12-20-2016, 02:39 PM | #15 |
Patron
LugerForum Patron Join Date: Aug 2004
Location: Houston, TX
Posts: 1,429
Thanks: 67
Thanked 292 Times in 191 Posts
|
For those interested, this information updates that listed in Table 14-3 of HWIS for the entry S.L.Pol.1892.
__________________
Regards, Don donmaus1@aol.com Author of History Writ in Steel: German Police Markings 1900-1936 http://www.historywritinsteel.com |
The following member says Thank You to Don M for your post: |
12-20-2016, 04:02 PM | #16 |
Lifer
Lifetime Forum Patron Join Date: Dec 2003
Location: PORT ST LUCIE, FLORIDA
Posts: 12,216
Thanks: 6,209
Thanked 4,133 Times in 2,173 Posts
|
You all deserve a Doctorate In Lugers! Nothing get by your eagle eyes!
|
12-20-2016, 04:21 PM | #17 | |
User
Join Date: Apr 2015
Location: near Charlotte NC
Posts: 4,678
Thanks: 1,441
Thanked 4,348 Times in 2,038 Posts
|
Quote:
thanks for your input- better late than not at all! I was surely disappointed with the end conclusion.
__________________
03man(Don Voigt); Luger student and collector. Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie |
|
12-21-2016, 08:57 AM | #18 |
Lifer
Lifetime Forum Patron Join Date: Jun 2002
Location: The Capital of the Free World
Posts: 10,152
Thanks: 3,003
Thanked 2,304 Times in 1,096 Posts
|
Good thing that the "new" numbers weren't filled with whitening to make them more readable... that would have made it very difficult to determine the pantographing... Nice job on your investigation and education of the Luger collecting community...
__________________
regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL and are endowed by their Creator with certain UNALIENABLE rights, and among these are life, LIBERTY, and the pursuit of happiness..." |
The following member says Thank You to John Sabato for your post: |
|
|