1938 Russian Tokarev TT33

sheepherder · 08-16-2016, 09:23 PM

Olle, I saved your thread because it was so detailed and such an elaborate jig. I can't make anything that small and have it turn out useful.

The only suggestion to those loops I can make is while they are still straight, drill a shallow hole in each end so that they can be staked inside the gripframe easier. If you're familiar with the slide stop plunger tube on M1911 frames, it doesn't take much of a stake to hold it but it's much easier with a hole in the lanyard loop to spread in the frame hole.

08-16-2016, 09:23 PM	#16
sheepherder Lifer Lifetime Forum Patron Join Date: Feb 2009 Location: ...on the 'ol Erie Canal... Posts: 8,208 Thanks: 1,425 Thanked 4,474 Times in 2,343 Posts	Olle, I saved your thread because it was so detailed and such an elaborate jig. I can't make anything that small and have it turn out useful. The only suggestion to those loops I can make is while they are still straight, drill a shallow hole in each end so that they can be staked inside the gripframe easier. If you're familiar with the slide stop plunger tube on M1911 frames, it doesn't take much of a stake to hold it but it's much easier with a hole in the lanyard loop to spread in the frame hole. __________________ I like my coffee the way I like my women... ...Cold and bitter...