Basic GTS/T-4 shooter complete!

Michael Zeleny · 07-03-2016, 04:28 AM

Can you fit this to an existing gun without modifying the frame or the sideplate and its contents, so as to retain compatibility with its original upper?

G.T. · 07-03-2016, 09:54 AM

Yes! Actually, the barrel will come as a complete receiver assembly, and if the frame is set up for 9MM, it should slide right in and work great! Although occasionally you find a frame / receiver match that is too tight, most of the time they slide right together and work fine.... The trigger / lock work is an area that is more problematic? But if both halves are correct, (in spec.) they should work fine?...

... Best to all, til...lat'r.....GT

07-03-2016, 04:28 AM	#1
Michael Zeleny Patron LugerForum Patron Join Date: Jul 2003 Location: Los Angeles Posts: 525 Thanks: 129 Thanked 139 Times in 76 Posts	Can you fit this to an existing gun without modifying the frame or the sideplate and its contents, so as to retain compatibility with its original upper? __________________ Michael Zeleny@post.harvard.edu -- http://larvatus.livejournal.com/ -- 7576 Willow Glen Road, Los Angeles, CA 90046 -- 323.363.1860 All of old. Nothing else ever. Ever tried. Ever failed. No matter. Try again. Fail again. Fail better. -- Samuel Beckett

07-03-2016, 09:54 AM	#2
G.T. Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: Chandler Arizona Posts: 3,541 Thanks: 1,342 Thanked 3,742 Times in 1,020 Posts	Hi Michael! Yes! Actually, the barrel will come as a complete receiver assembly, and if the frame is set up for 9MM, it should slide right in and work great! Although occasionally you find a frame / receiver match that is too tight, most of the time they slide right together and work fine.... The trigger / lock work is an area that is more problematic? But if both halves are correct, (in spec.) they should work fine?... ... Best to all, til...lat'r.....GT