Luger Failure to feed

Lugerdoc · 10-06-2014, 11:57 AM

If the above extractor problems appear not to be the cause, I'd recommend checking the rear end of the toggle assy, ie the S shaped connecting link. If that part is damaged or inproperly installed, it can prevent the toggle from fully closing. In the last 50 years, I've run into a couple of cases where a bubba has installed a M1900 link in a P08 and the toggle will not fully close, either with or without a cartridge. TH

10-06-2014, 11:57 AM	#7
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	If the above extractor problems appear not to be the cause, I'd recommend checking the rear end of the toggle assy, ie the S shaped connecting link. If that part is damaged or inproperly installed, it can prevent the toggle from fully closing. In the last 50 years, I've run into a couple of cases where a bubba has installed a M1900 link in a P08 and the toggle will not fully close, either with or without a cartridge. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net