New Collector Questions

mrerick · 10-03-2014, 01:23 PM

I wouldn't call this common, but it's typical of parts assembled firearms.

With some study, you can determine the details of your second pistol's frame manufacturer.

In some years, grips were not numbered, but you should find inspector marks associated with the Mauser factory stamped into them.

The firing pin should be numbered, and should have flutes cut into it (3 near the front).

The inside of the trigger plate should have a number relating to the first digits of the serial number. Either the number itself, or the number plus one.

If you see a large "X" stamped into the frame or other parts, they were possibly Russian Capture guns and might have been refitted by an Eastern Block arsenal.

These should make good shooters if fitted properly.

Congratulations!

Marc

10-03-2014, 01:23 PM	#2
mrerick Super Moderator - Patron LugerForum Life Patron Join Date: Dec 2009 Location: Eastern North Carolina, USA Posts: 3,920 Thanks: 1,377 Thanked 3,135 Times in 1,518 Posts	I wouldn't call this common, but it's typical of parts assembled firearms. With some study, you can determine the details of your second pistol's frame manufacturer. In some years, grips were not numbered, but you should find inspector marks associated with the Mauser factory stamped into them. The firing pin should be numbered, and should have flutes cut into it (3 near the front). The inside of the trigger plate should have a number relating to the first digits of the serial number. Either the number itself, or the number plus one. If you see a large "X" stamped into the frame or other parts, they were possibly Russian Capture guns and might have been refitted by an Eastern Block arsenal. These should make good shooters if fitted properly. Congratulations! Marc __________________ Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war.