First Luger; having issues

nukem556 · 09-25-2014, 09:22 PM

You may have a weak extractor spring causing the ejection problems. Test the total toggle travel by putting some wet nail polish on the underside of the rear toggle piece tang and a fresh piece of masking tape on the back of the frame and shoot it. If it's marked, the toggle is going back as far as it can go. As far as feeding problems, you may have a worn mag catch causing all or your mags to sit too low...long shot, but hey.

09-25-2014, 09:22 PM	#6
nukem556 User Join Date: Jul 2010 Location: Irmo, SC Posts: 625 Thanks: 35 Thanked 168 Times in 107 Posts	You may have a weak extractor spring causing the ejection problems. Test the total toggle travel by putting some wet nail polish on the underside of the rear toggle piece tang and a fresh piece of masking tape on the back of the frame and shoot it. If it's marked, the toggle is going back as far as it can go. As far as feeding problems, you may have a worn mag catch causing all or your mags to sit too low...long shot, but hey.