Toggle Stuck Open?

lugerholsterrepair · 09-08-2013, 09:46 PM

Luke..OK I just performed this on my bench pistol with ease. On the right side just BELOW the angular ejector that juts out there is a small ledge. About 1/4 inch below the ejector..there is a slot in front of this ledge where the holdopen narrows down for the flat spring. Go to the right of this slot to the ledge RIGHT under the ejector..take a small dowell or almost any tool..a nut pick..anything small enough and push down on this ledge. It's right on front of the bolt face..It immediately released my bolt.

09-08-2013, 09:46 PM	#11
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,775 Thanks: 4,995 Thanked 3,134 Times in 1,439 Posts	Luke..OK I just performed this on my bench pistol with ease. On the right side just BELOW the angular ejector that juts out there is a small ledge. About 1/4 inch below the ejector..there is a slot in front of this ledge where the holdopen narrows down for the flat spring. Go to the right of this slot to the ledge RIGHT under the ejector..take a small dowell or almost any tool..a nut pick..anything small enough and push down on this ledge. It's right on front of the bolt face..It immediately released my bolt. __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."