Glue for Rifle Stock Repair???

[Olle]

Originally Posted by G.T.

Olle is correct, matching is hard, except when you go dark.... Then, you can start light on one part, and then go dark to match... three levels of stain can be accomplished with Fibbings leather dye... light, med, dark brown... it's an aniline dye.. and has no filler, just color... then use Danish oil, natural, it works better then BLO, dries better, Good luck Rich, til...lat'r....GT

I like Formby's Tung Oil, it seems to penetrate the wood and give it a nice, deep shine. It dries pretty quick, but it takes many coats to build up the finish.

That dye sounds interesting. One problem with stain is that you need to get just about all the color on in the first shot, after the first coat is dry it will seal the wood and the next coat won't soak into the wood. It's difficult to correct the color if you don't get it right to begin with, so using stain might give you more leeway.

I used to work for a cabinet factory, and they used different dyes mixed with alcohol. One problem they had when matching wood pieces was the red and yellow tones, so sometimes they had to pretreat with red or yellow dye before the stain. I believe these dyes are available from, for example, Woodcraft. I have also heard of woodworkers taking the felt tips out of Sharpies, then soak them in alcohol to make dye.