Wooden Bottom Mag problem..

Luke · 03-17-2002, 04:02 PM

Have not attempted repair of a magazine bottom, but I have successfully repaired a left grip with the following method:

First use a cotton Q-Tip and clean the broken surfaces with acetone. Allow to dry and repeat. Allow to dry overnight. (ONLY APPLY ACETONE, A HIGHLY VOLATILE LIQUID, OUTDOORS IN GOOD WEATHER.) Then apply a VERY thin coat of 2-part epoxy and hold under pressure until the epoxy sets.

If done carefully the crack will not be visible except under a strong magnifier.

03-17-2002, 04:02 PM	#4
Luke User Join Date: Jun 2002 Location: NC - USA Posts: 1,239 Thanks: 0 Thanked 19 Times in 7 Posts	Re: Wooden Bottom Mag problem.. Have not attempted repair of a magazine bottom, but I have successfully repaired a left grip with the following method: First use a cotton Q-Tip and clean the broken surfaces with acetone. Allow to dry and repeat. Allow to dry overnight. (ONLY APPLY ACETONE, A HIGHLY VOLATILE LIQUID, OUTDOORS IN GOOD WEATHER.) Then apply a VERY thin coat of 2-part epoxy and hold under pressure until the epoxy sets. If done carefully the crack will not be visible except under a strong magnifier.